Charged Reviews · Quick reference
Canadian Solar CS6.1-54TM-440H/B
- Brand
- Canadian Solar
- Model
- CS6.1-54TM-440H/B
- SKU / part number
- CS6.1-54TM-440H/B Provisional [1]
- Category
- Solar panels
chargedreviews.com/panels/canadian-solar-cs6-1-54tm-440h-b
Electrical at STC
Temperature and system limits
Cells and construction
- Cell technology
- N-Type TOPCon Provisional [1]
- Cell count
- ?
- Bifacial
- ?
- Bifaciality
- ?
- Frame
- ?
- Front glass
- ?
- Back cover
- ?
- Panel format
- ?
Mechanical and connections
Installation (from the manual)
Conductors
- Cable bending radius / connector notes
- A minimum bending radius of 60 mm (2.36 in) is required when securing the junction box cables to the racking system. Needs confirmation [3]
Clearances and orientation
- Mounting methods and clamp zones
- Bolting, Table 3, CS6.1-54TM-H: outer four holes O-A +5400Pa/ -4000Pa*, O-B +5400Pa/ -4000Pa* (*: D-type washer with outer diameter 23mm); inner and middle holes not tested; 6.2.1 Clamp mounting on long side of frame and rails perpendicular to the long side frame, CS6.1-54TM-H: A Range 0-200 mm at +2400/-2400 Pa, 200-650 mm at +3600/-2400 Pa, 300-550 mm at +5400/-3600 Pa, 450-550 mm at +7000/-5400 Pa; 6.2.2 Clamp mounting on short side of frame and rails perpendicular to the long side frame, CS6.1-54TM-H: A Range 200-250 mm at +2400/-2400 Pa; 6.2.3 Clamp mounting on long side of frame and rails parallel to the long side frame, CS6.1-54TM-H: A1 Range 100-600 mm at +4000/-2400 Pa, 450-550 mm at +5400/-2400 Pa Needs confirmation [3]
Grounding
- Grounding
- GROUNDING METHOD: BOLT + TOOTHED NUT + CUP WASHER.; we recommend using 4-14 mm² (AWG 6-12) copper wire.; Ensure that the cup washer is positioned between the frame and the wire with the concave side up to prevent galvanic corrosion.; The tightening torque is 3-7 Nm (2.2-5.2 ft-lbs). Needs confirmation [3]
Not in the manual: Torque