Enphase IQ System Controller 3M: Enphase's product image of the IQ System Controller 3M (SKU SC200D111CMC1US01) on its US store page. Enphase uses this image for the IQ System Controller 3, 3G and 3M.

1 photo · Image from enphase.com

Photo sources

Manufacturer and seller images. Configuration examples may include additional equipment.

Image source: Enphase's product image of the IQ System Controller 3M (SKU SC200D111CMC1US01) on its US store page. Enphase uses this image for the IQ System Controller 3, 3G and 3M.

Enphase IQ System Controller 3M

Name: Enphase IQ System Controller 3M
Brand: Enphase
SKU: SC200D111CMC1US01

By EnphaseSKU SC200D111CMC1US01

Microgrid interconnect device

No reviews · Write the first

Write a review

No sellers found.

SaveReport an error Write a review Quick reference sheet

Maximum current160 A Service voltage240 V nominal line-to-line and 120 V line-to-neutral, both +/-20%, 60 Hz; includes a neutral-forming transformer for split-phase 120/240 V backup operation PV and storage portsThree branch-circuit distributed energy resource positions, each 64 A maximum continuous with an 80 A maximum overcurrent protection device, usable for photovoltaic or battery Generator inputNone on file Safety listingUL 1741, UL 1741 SA, UL 1741 PCS CRD, UL 1998, UL 869A, UL 508, UL 50E, CSA 22.2 No. 107.1, ICC ES AC156; grid compliance IEEE 1547-2018 and IEEE 1547.1 2020 (UL 1741 SB); FCC 47 CFR Part 15 Class B Product warranty10 years

Key specs

Units

SKU: SC200D111CMC1US01
Official datasheet
Sources
The stock keeping unit printed on the store page; the data sheet publishes the same string as the model number.
Official product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier documentOfficial datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Store page SKU line; data sheet Model number table
Documented
Enclosure: Outdoor, NEMA type 3R, polycarbonate construction
Official datasheet
Sources
Ambient temperature range is published as -40 to 50 degrees Celsius, maximum altitude 2,500 metres.
Official datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Data sheet Mechanical data, enclosure environmental rating
Documented
Safety listing: UL 1741, UL 1741 SA, UL 1741 PCS CRD, UL 1998, UL 869A, UL 508, UL 50E, CSA 22.2 No. 107.1, ICC ES AC156; grid compliance IEEE 1547-2018 and IEEE 1547.1 2020 (UL 1741 SB); FCC 47 CFR Part 15 Class B
Official datasheet
Sources
The manufacturer’s own compliance list, split by Enphase into grid, safety and electromagnetic-compatibility rows and transcribed as printed.
Official datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Data sheet Compliance
Documented
Service voltage: 240 V nominal line-to-line and 120 V line-to-neutral, both +/-20%, 60 Hz; includes a neutral-forming transformer for split-phase 120/240 V backup operation
Official datasheet
Sources
The neutral-forming transformer is published at 3,600 VA continuous with a 40 A pre-installed breaker between each line and neutral.
Official datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier documentOfficial product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier document
Location: Data sheet Key specifications and Electrical specifications; store page Details list
Documented
Grounding (manual): typically not service entrance; if tapped on grid side of main panel, add a system-bonding jumper between neutral and ground bars
Official instruction manual
Sources
Printed as "The IQ System Controller 3M is typically not used as a service entrance. However, If the IQ System Controller 3M is being tapped on the grid side of the main panel, then, 1. Connect a suitable system-bonding jumper between the neutral and ground bars." in Enphase's IQ System Controller 3M quick install guide (PDF page 39). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 39
Documented
PV and storage ports: Three branch-circuit distributed energy resource positions, each 64 A maximum continuous with an 80 A maximum overcurrent protection device, usable for photovoltaic or battery
Official datasheet
Sources
The data sheet footnotes that a distributed energy resource port can be used for photovoltaic or battery up to 64 A. Ports are breaker positions, not connectors, and there is no direct photovoltaic input.
Official datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Data sheet Electrical specifications, branch-circuit column and footnote 6
Documented
Installation clearances (manual): at least 6 in from other electrical panels and IQ Batteries; A = 6 in indoor, 36 in outdoor
Official instruction manual
Sources
Printed as "For indoor installation, A=6 inches For outdoor installation, A=36 inches This product must be installed with clearance at the left, right, top, bottom, and front of the product, as shown in the figure." in Enphase's IQ System Controller 3M quick install guide (PDF page 11). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 11
Documented
Maximum current: 160 A
Official datasheet
Sources
Maximum continuous input and output current for the back-fed breaker path; the branch-circuit path is published separately at three times 64 A. The maximum input and output overcurrent protection devices are 200 A and three times 80 A respectively, the internal busbar is 200 A, and the short-circuit interrupt ratings are 22 kA and 10 kA.
Official product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier documentOfficial datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Store page Technical specifications; data sheet Key specifications and Electrical specifications
Documented
Generator input: None. Enphase publishes this model as not supporting generator integration
Official datasheet
Sources
The System Shutdown Switch shipped with the unit is published as disconnecting photovoltaic and battery systems only, and the data sheet lists no generator circuit for this model number.
Official product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier documentOfficial datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Store page product description; data sheet Electrical specifications
Documented

3 specs not documented yet: rated capacity, usable capacity, dimensionsHelp fill in ›

All specs15

Rated capacity: Not documented
Usable capacity: Not documented

Lifetime production

Not published

Published claims and calculations are not independently tested lifetime output.

Safety listing: UL 1741, UL 1741 SA, UL 1741 PCS CRD, UL 1998, UL 869A, UL 508, UL 50E, CSA 22.2 No. 107.1, ICC ES AC156; grid compliance IEEE 1547-2018 and IEEE 1547.1 2020 (UL 1741 SB); FCC 47 CFR Part 15 Class B
Official datasheet
Sources
The manufacturer’s own compliance list, split by Enphase into grid, safety and electromagnetic-compatibility rows and transcribed as printed.
Official datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Data sheet Compliance
Documented
Service voltage: 240 V nominal line-to-line and 120 V line-to-neutral, both +/-20%, 60 Hz; includes a neutral-forming transformer for split-phase 120/240 V backup operation
Official datasheet
Sources
The neutral-forming transformer is published at 3,600 VA continuous with a 40 A pre-installed breaker between each line and neutral.
Official datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier documentOfficial product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier document
Location: Data sheet Key specifications and Electrical specifications; store page Details list
Documented
Grounding (manual): typically not service entrance; if tapped on grid side of main panel, add a system-bonding jumper between neutral and ground bars
Official instruction manual
Sources
Printed as "The IQ System Controller 3M is typically not used as a service entrance. However, If the IQ System Controller 3M is being tapped on the grid side of the main panel, then, 1. Connect a suitable system-bonding jumper between the neutral and ground bars." in Enphase's IQ System Controller 3M quick install guide (PDF page 39). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 39
Documented
PV and storage ports: Three branch-circuit distributed energy resource positions, each 64 A maximum continuous with an 80 A maximum overcurrent protection device, usable for photovoltaic or battery
Official datasheet
Sources
The data sheet footnotes that a distributed energy resource port can be used for photovoltaic or battery up to 64 A. Ports are breaker positions, not connectors, and there is no direct photovoltaic input.
Official datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Data sheet Electrical specifications, branch-circuit column and footnote 6
Documented
Installation clearances (manual): at least 6 in from other electrical panels and IQ Batteries; A = 6 in indoor, 36 in outdoor
Official instruction manual
Sources
Printed as "For indoor installation, A=6 inches For outdoor installation, A=36 inches This product must be installed with clearance at the left, right, top, bottom, and front of the product, as shown in the figure." in Enphase's IQ System Controller 3M quick install guide (PDF page 11). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 11
Documented
Maximum current: 160 A
Official datasheet
Sources
Maximum continuous input and output current for the back-fed breaker path; the branch-circuit path is published separately at three times 64 A. The maximum input and output overcurrent protection devices are 200 A and three times 80 A respectively, the internal busbar is 200 A, and the short-circuit interrupt ratings are 22 kA and 10 kA.
Official product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier documentOfficial datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Store page Technical specifications; data sheet Key specifications and Electrical specifications
Documented
Generator input: None. Enphase publishes this model as not supporting generator integration
Official datasheet
Sources
The System Shutdown Switch shipped with the unit is published as disconnecting photovoltaic and battery systems only, and the data sheet lists no generator circuit for this model number.
Official product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier documentOfficial datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Store page product description; data sheet Electrical specifications
Documented
AC input breaker (manual): Eaton CSR breakers 100 A to 200 A only, for main connections
Official instruction manual
Sources
Printed as "Only Eaton CSR range breakers with ratings between 100 A and 200 A can be used for the main connections." in Enphase's IQ System Controller 3M quick install guide (PDF page 17). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 17
Documented
AC terminal torque (manual): 31.1 N·m
Official instruction manual
Sources
Printed as "Main lugs 31.1/275 300 kcmil-6 Cu/Al 75°C" in Enphase's IQ System Controller 3M quick install guide (PDF page 38). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 38
Documented
Battery fuse or breaker (manual): up to 1 × 80 A breaker for PV and 1 × 80 A for IQ Batteries; third DER port 80 A
Official instruction manual
Sources
Printed as "This configuration supports up to 1 × 80 A breaker for PV and up to 1 × 80 A breaker for the IQ Batteries. In addition, the third DER port can be used with an additional 80 A breaker for either the IQ Batteries or PV." in Enphase's IQ System Controller 3M quick install guide (PDF page 4). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 4
Documented
Mounting orientation (manual): vertical wall only
Official instruction manual
Sources
Printed as "This product is designed to be installed on a vertical wall only. Do not install this product flat on the ground." in Enphase's IQ System Controller 3M quick install guide (PDF page 10). The manual applies to this model: IQ System Controller 3M quick install guide: names SC200D111CMC1US01 (p2, p33-34).
Official instruction manual: Enphase: IQ System Controller 3M quick install guide Checked Oct 15, 2026 · Earlier document
Location: PDF page 10
Documented

Published claims and calculations, not independent test results.

Documents

3 on file

WEB
Enphase IQ System Controller 3M data sheetOfficialEnphase EnergyOfficial datasheetMarch 18, 2025
Source details
Revision
DSH-00484-4.0-EN
Revision date
March 18, 2025
Location: Key specifications table; Electrical specifications; Mechanical data; Compliance; Warranty
Retrieved Sep 20, 2026
Recorded document/effective date: Mar 18, 2025
Manufacturer data sheet DSH-00484-4.0-EN dated 18 March 2025, downloaded on 21 September 2026. It records the figures Enphase publishes for model number SC200D111CMC1US01; the compliance list is the manufacturer’s statement of the standards used in its listing, not a certificate.
Archived copies
Archived copy of a document published by Enphase Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
Archived backup DSH-00484-4.0-EN · 1.64 MB
Archived copy, unaltered, kept as a record of what Enphase Energy published. Original address: https://enphase.com/download/iq-system-controller-3m-data-sheet. Copyright and takedown
Source first found
Sep 20, 2026, 5:00 PM PDT
This copy captured
Sep 20, 2026, 5:00 PM PDT
Archived
Sep 20, 2026, 5:00 PM PDT
File details
Original source
Printed revision date: 2025-03-18
Embedded dates are file metadata, not independent proof of publication.
SHA-256: e523db444a377ae83acc773a8a64ef1f94b9536f3fb2af5b7fcb70e3517f6b78
Open
WEB
Enphase: IQ System Controller 3M quick install guideOfficialEnphaseOfficial instruction manual
Source details
Revision
Not stated
Revision date
Not stated
Archived copy captured on 2026-10-16.
Location: Installation instructions
Retrieved Oct 15, 2026
Enphase's own manual, captured October 15, 2026 with the paced research fetcher (robots.txt read first). Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by Enphase. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.
Archived backup Revision not recorded · 8.25 MB
Archived copy, unaltered, kept as a record of what Enphase published. Original address: https://enphase.com/download/iq-system-controller-3m-quick-install-guide. Copyright and takedown
Source first found
Oct 16, 2026
This copy captured
Oct 15, 2026, 5:45 PM PDT
Archived
Oct 15, 2026, 5:45 PM PDT
File details
Original source
Pages
41
Embedded creation date
Jan 21, 2025
Embedded modification date
Jan 21, 2025
Embedded dates are file metadata, not independent proof of publication.
SHA-256: a140742ce28a24da227cd3bfffd9a72bf25193d4e746e9f585b44d1c9d55976e
Open
WEB
Enphase IQ System Controller 3M store pageOfficialEnphase EnergyOfficial product page
Source details
Revision
Not stated
Revision date
Not stated
Location: SKU line; product description; Details list; Technical specifications accordion
Retrieved Sep 20, 2026
Manufacturer-operated store page read on 21 September 2026. It establishes the stock keeping unit, the headline technical specifications and the warranty line Enphase publishes for this model on that date; the page is a storefront and no price, stock state or fulfilment claim from it is recorded here.
Open

Archive and older revisions0

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

Archived documents

Enphase IQ System Controller 3M data sheet

Archived copy of a document published by Enphase Energy. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.

Archived backup DSH-00484-4.0-EN · 1.64 MB

Archived copy, unaltered, kept as a record of what Enphase Energy published. Original address: https://enphase.com/download/iq-system-controller-3m-data-sheet. Copyright and takedown

Source first found: Sep 20, 2026, 5:00 PM PDT
This copy captured: Sep 20, 2026, 5:00 PM PDT
Archived: Sep 20, 2026, 5:00 PM PDT

File details

Original source

Printed revision date: 2025-03-18

Embedded dates are file metadata, not independent proof of publication.

SHA-256: e523db444a377ae83acc773a8a64ef1f94b9536f3fb2af5b7fcb70e3517f6b78

Enphase: IQ System Controller 3M quick install guide

Archived copy of a document published by Enphase. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email legal@chargedreviews.com.

Archived backup Revision not recorded · 8.25 MB

Archived copy, unaltered, kept as a record of what Enphase published. Original address: https://enphase.com/download/iq-system-controller-3m-quick-install-guide. Copyright and takedown

Source first found: Oct 16, 2026
This copy captured: Oct 15, 2026, 5:45 PM PDT
Archived: Oct 15, 2026, 5:45 PM PDT

File details

Original source

Pages: 41
Embedded creation date: Jan 21, 2025
Embedded modification date: Jan 21, 2025

Embedded dates are file metadata, not independent proof of publication.

SHA-256: a140742ce28a24da227cd3bfffd9a72bf25193d4e746e9f585b44d1c9d55976e

Submit a document

Warranty

Product warranty: 10 years
Official datasheet
Sources
Published as up to 10 years, with restrictions; the data sheet notes the System Shutdown Switch (EP200G-NA-02-RSD) carries 5 years.
Official product page: Enphase IQ System Controller 3M store page Checked Sep 20, 2026 · Earlier documentOfficial datasheet: Enphase IQ System Controller 3M data sheet Rev DSH-00484-4.0-EN · March 18, 2025 · Checked Sep 20, 2026 · Earlier document
Location: Store page Warranty accordion; data sheet Warranty
Documented