conditions: WattCycle’s own ordering code, read from the storefront product feed captured on September 22, 2026. The other two codes on the same page bundle this inverter with a 5.12 kWh battery and are not separate products.
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. The product page adds an acoustic claim of "≤40dB", while the datasheet’s own noise row prints "≤60dB"; that disagreement is recorded in the identity note rather than resolved.
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Printed as "11.5kg±3%/25.35lb±3%"; the published tolerance is not carried in the value.
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. One tracker, unlike the dual-MPPT 6.5 kW and 12 kW models in the same range.
Where: Datasheet, PV charging, Number of MPPT groups row
Printed as "Peak power Split phase: 9000VA Single phase: 7200VA" in WattCycle's datasheet for WTINV48V6KWSP-SGRG-US (V1.0), captured on September 25, 2026. No duration is printed for these figures.
W 339 × H 127 × L 483 mm / W 13.3 × H 5 × L 19 in converted
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Printed as "483x339x127mm/ 19.02x13.35x5.00inch"; the millimetre figures are WattCycle’s own, not a conversion, and the order is the datasheet’s L*W*H.
USB, RS485 (Wi-Fi or GPRS dongle) and dry-contact control
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. The product page adds that the RS485/CAN battery port speaks the protocols of "major brands such as Pylon, Dyness, and Sunwoda" and that monitoring is over Wi-Fi; no protocol list or dongle part number is published.
Where: Datasheet, Communication interface row; product page feature list
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Printed as ">93%" and recorded as the published lower bound of the maximum; it is a peak figure, not a weighted or CEC efficiency, and no load point is stated. Grid-charging efficiency is published separately as greater than 95 per cent.
Where: Datasheet, Maximum efficiency of inverter output row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Narrower than the 90 to 485 V operating range printed in the same block; the tracker only tracks inside this window.
Where: Datasheet, PV charging, MPPT voltage range row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. The row group prints 9000W as the maximum PV input power, and the product page advertises the same 9000 W as "9000W High-Power MPPT".
Where: Datasheet, PV charging, Maximum PV input power row
Solar and utility grid can power loads at the same time. Anti feed-in, self-consumption function (can be hybrid power supply from solar, battery and grid). Two output modes: Mains bypass and inverter output; uninterrupted power supply. Can be extended: external CT for whole house energy anti feed-in and self-consumption.
Printed in the introduction of the WattCycle 48V 6KW Solar Charger Inverter datasheet, version V1.0 (July 21, 2026). Revised on 30 September 2026: The recorded value paired a description written by the catalog with a negative statement about the page ("the page does not claim a utility interconnection listing such as UL 1741 SA or IEEE 1547" or "no utility interconnection listing is claimed"), which is not manufacturer text; the value now quotes what the manufacturer prints about grid operation.
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Printed with a charge-current error of ±5 A DC and a charge voltage range of 40 to 58.6 V DC. The charger supports lead-acid as well as lithium batteries.
Where: Datasheet, AC charging, Maximum charge current row
WattCycle rates the same unit differently on the two configurations, 6000 W split phase against 4800 W single phase, and the peak figures follow the same split. The bypass breaker is specified as two poles of 40 A each.
Where: Product page feature list; datasheet, AC mode and Inverter mode rows
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. The product page adds that two PV inputs may be connected in parallel.
Where: Datasheet, PV charging, Maximum PV input current row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. This is the absolute open-circuit limit; the operating window is narrower and is recorded separately.
Where: Datasheet, PV charging, Maximum PV open circuit voltage row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. This is the combined AC-plus-PV charging limit and it is settable from zero; AC charging alone is limited to 100 A.
Where: Datasheet, Hybrid charging, Max charger current row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Published as typical, not maximum. The product page makes the same claim as "≤10ms UPS Seamless Switching".
Where: Datasheet, Conversion time (bypass and inverter) row
Automatic generator start when battery voltage falls
The product page prints "Smart Generator Auto Control: Automatically starts the generator when battery voltage drops, ideal for unattended or off-grid applications." No start voltage, contact rating or generator interface is published, and the datasheet does not repeat the claim.
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. The same row prints a minimum starting voltage of 44 V.
Where: Datasheet, Inverter mode, Rated battery input voltage row
The maker prints this peak only in volt-amperes, with no rating in W, so the watt figure stays unknown; the printed peak is recorded under peak output ("9,000 VA (split phase); 7,200 VA (single phase)"). Revised on 12 October 2026: this watt field held 9000 VA; it is kept in this note.
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Printed as "Parallel mode Permitted parallel number NO": this model cannot be stacked, and one unit is the whole system.
Where: Datasheet, Parallel mode, Permitted parallel number row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. The row pairs the operating range with a settable PV charging current of 0 to 120 A. Start-up voltage is published separately as 120 V.
Where: Datasheet, PV charging, PV operating voltage range row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026.
Where: Datasheet, PV charging, Start-up Voltage row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Output is a pure sine wave at 50 Hz ±0.3 Hz or 60 Hz ±0.3 Hz.
Where: Datasheet, Inverter mode, Rated output voltage and Output voltage error rows
WattCycle’s product page prints "Supports 120V/240V split-phase output (6000W) and 120V single-phase output (4800W), flexibly adapting to various home power needs", and the datasheet’s rated-output rows print the same pair, "Split phase:6000 Single phase: 4800", for both volt-amperes and watts. The split-phase figure is recorded as the rated output; on single phase the same unit is rated 4.8 kW.
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. The datasheet adds that the undervoltage alarm, shutdown, overvoltage alarm and overvoltage recovery points inside that range are all settable on the LCD.
Where: Datasheet, Inverter mode, Battery voltage range row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Storage is rated wider, -25 to 60 °C. No derating curve is published.
Where: Datasheet, Certified specifications, Operating temperature range row
Printed in the specification table of WattCycle’s 48V 6KW Solar Charger Inverter datasheet, version V1.0 of July 21, 2026, archived here on September 22, 2026. Printed as "FCC part15, CLASS B". FCC Part 15 is an emissions rule, not a safety listing; no grant, test report or issuer record was read.
Lowest first. Each price is the date we last read it; it may have changed. Stock isn't shown.
Store
Price
Read
Details
Source
WattCycle
$899.99
Nov 16, 2026
One new unit at the exact variant price in WattCycle's own US store (wattcycle.com)'s product feed, captured October 3, 2026; shipping and tax are not included. · Store SKU WTINV48V6KWSP-SGRG-USPrice readings (28)
20.79 L* (Calculated from published dimensions)W: 339 × H: 127 × L: 483 mm / W: 13.3 × H: 5 × L: 19 inWeight11.5 kg / 25.4 lb
Evidence score
1/100Missing details30% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificate evidence needed; Battery conversion efficiency needed; Idle consumption needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
Warranty term1 year1.2 / 30.0
1 of 25 years, the best documented for an inverter (printed by the maker): APsystems DS3
WattCycle’s Warranty Policy page, captured September 22, 2026, prints "Accessories Chargers, inverters, controllers, wiring cables , etc. 1 year". An inverter therefore carries one year from the original consumer’s purchase date and no registration extension: the two-year extension in the table belongs only to the "LiFePO4 Batteries" row. The policy names no individual model.
Research pending, 0 points: Certificates, Battery conversion efficiency, Idle consumption.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 3.5 to 7 kW output band. · Method version 0.5
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
Unknown: no certification evidence recorded in this data.
Warranty
Field
Value
Conditions
Source
Remedy
Free replacement or refund for a quality defect confirmed within six months of purchase, free replacement for one confirmed after six months and inside the term; WattCycle pays shipping both ways in either case, after an RMA number is issued
Where: Warranty Policy page, section II "Warranty Claim Process and Fees", fee-responsibility table and refund policy
Excludes accident, abuse and force majeure; failure to follow the manual; voltage or current mismatch, reverse polarity, wrong fuses or undersized cables; unauthorised disassembly, modification or repair and altered serial numbers; cosmetic wear from normal use; and use beyond the product’s rated specifications
Summarised from the exclusion list on WattCycle’s Warranty Policy page captured September 22, 2026, which is written as one list for every product category. The page carries no effective or revision date and WattCycle reserves the right of final interpretation and to revise the policy.
Where: Warranty Policy page, section III "Warranty Exclusions (Limitations of Liability)"
WattCycle’s Warranty Policy page, captured September 22, 2026, prints "Accessories Chargers, inverters, controllers, wiring cables , etc. 1 year". An inverter therefore carries one year from the original consumer’s purchase date and no registration extension: the two-year extension in the table belongs only to the "LiFePO4 Batteries" row. The policy names no individual model.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-22.
Location: Page 2 specification table: Parallel mode, AC mode, Inverter mode, PV charging, AC charging, Certified specifications
Retrieved Sep 21, 2026
Recorded document/effective date: Jul 21, 2026
WattCycle’s two-page datasheet for the 48V 6KW solar charger inverter, linked under "Download User Manual" on the product page and archived here byte for byte on September 22, 2026. Its file name carries the model code and the version and date, V1.0 of 2026.07.21, though neither is printed inside the document. It is the only WattCycle PDF in this pass with a machine-readable text layer, and it establishes the model’s rated and peak output on both phase configurations, its battery, PV and AC-charging ranges, its protection thresholds, its conversion time, its enclosure temperature range, its dimensions and its weight; every figure this manifest records for the model comes from it. The table is laid out in columns that the text layer flattens, so each figure is quoted with enough of its row to be unambiguous. It names FCC Part 15 Class B as its only compliance claim, prints no UL or IEEE listing, and no test report or issuer record was read.
Archived copies
Archived copy of a document published by WattCycle. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-22.
Location: Sections "I. Warranty Commitment" (warranty-period table and registration note), "II. Warranty Claim Process and Fees" (claim steps, fee-responsibility table, refund policy) and "III. Warranty Exclusions (Limitations of Liability)"
Retrieved Sep 21, 2026
WattCycle’s Warranty Policy page, linked from the footer of every page on www.wattcycle.com and captured byte for byte on September 22, 2026. It establishes the terms WattCycle published on the access date: a warranty-period table that gives all new LiFePO4 battery models a five-year base term plus two further years (seven total) on registration within three months of purchase, gives like-new units one year, gives battery cells no warranty at all, and puts chargers, inverters, controllers and wiring cables together in an "Accessories" row with a one-year term; the claim process and its 24-48 hour response promise; a fee table under which WattCycle pays shipping for a confirmed quality defect and the buyer pays it for a change of mind; a refund window of six months; and an exclusion list. It names no individual model, carries no effective or revision date, and reserves WattCycle’s "right of final interpretation", so it fixes no claim outcome and cannot be read as a warranty contract for any one product.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-22.
Location: Feature bullets; "Download User Manual" link to the 6kW datasheet; the Tech Specs tab is empty
Retrieved Sep 21, 2026
Manufacturer-operated product page for the 6kW 48V split-phase all-in-one inverter (WTINV48V6KWSP-SGRG-US), captured byte for byte on September 22, 2026. It establishes what WattCycle published on the access date: the feature list, the bundle variants and the link to the model’s own datasheet. Its "Tech Specs" tab is empty, so the page itself carries no specification table and every figure recorded for this product is read from the archived datasheet instead; the page is used for the model’s identity, its communication claims and its own statement that switching is "≤10ms". WattCycle claims no UL 1741 listing for this model here -- the UL1741-by-ETL badge on this site belongs to the 12kW model -- and no certificate, test report or issuer record was read. It is a marketing page, not a signed specification: WattCycle prints no revision, no test standard and no measurement conditions beside its figures, and any standard named on it is a manufacturer claim that no issuer record was read against.
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
WattCycle 48V 6KW Solar Charger Inverter datasheet, version V1.0 (July 21, 2026)
Archived copy of a document published by WattCycle. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product. CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.