Charged ReviewsSaved 0Compare 0Login

Charged Reviews · Quick reference

MPP Solar MPI 10K 10kW 48V 400V Three-Phase Hybrid Inverter

Brand
MPP Solar
Model
MPI 10K
SKU / part number
MPI 10K [1] [2]
Category
Inverters

chargedreviews.com/inverters/mpp-solar-mpi-10k

AC output

Continuous output
10 kW [1] [3]
Peak output
?
AC configuration
400Vac, 3-Phase [3]
AC output voltage
230 VAC (P-N) / 400 VAC (P-P) [1]
AC frequency
50 Hz / 60 Hz (auto sensing) [1]
Grid pass-through
?
Maximum output per leg
?

Battery

Battery voltage
48 V [1] [3]
Battery voltage range
40 to 60 V [1]
Maximum charge current
200 A [1] [3]
Maximum discharge current
275 A [1]
Battery-only output
10 kW [1] [3]
Maximum grid charging
?
Compatible batteries / BMS
?

PV input

PV array limit (connected)
?
PV input limit (converted)
14.85 kW [1] [3]
Maximum PV voltage (Voc)
900 V [1] [3]
MPPT voltage range
350 to 850 V [1] [3]
MPPT trackers
2 [3]
String inputs per MPPT
?
PV current per MPPT
2*18.6 A [1]
PV short-circuit current
25 A [1]
PV startup voltage
320 V [1]

Efficiency and modes

Peak efficiency
91 % [1]
CEC weighted efficiency
?
Battery conversion efficiency
?
Grid / off-grid modes
Grid-Tied (Feedback), Off Grid, Grid-Tied with Battery Backup [3]
Generator input
?
Transfer time
?
Idle consumption
?
Parallel units
6 [1] [3]

Communication and environment

Communications
RS-232; USB; Intelligent Slot [1]
Operating temperature
-10 to 55 °C / 14 to 131 °F converted [1]
Enclosure rating
IP20 [1]
Operating noise
?

Mechanical

Dimensions
W 500 × H 167.2 × D 622 mm / W 19.7 × H 6.58 × D 24.5 in converted [1]
Weight
40 kg / 88 lb converted [1]

Installation (from the manual)

Torque

AC terminal torque
1 to 1.5 N·m [1]
Battery terminal torque
5.5 to 7 N·m [1]
PV terminal torque
?
Ground terminal torque
?

Conductors

Battery conductors
85 mm2 (AWG 3/0) [1]
AC input conductors
10-16 mm2 (AWG 8-6) [1]
AC output conductors
5.5-10 mm2 (AWG 10-8) [1]
PV conductors
?
Ground conductor
?

Protection

AC input breaker
?
AC output breaker
The inverter is built in a 63A/400V breaker [1]
Battery fuse or breaker
60VDC/300A circuit breaker [1]
PV disconnect
1000VDC/20A circuit breaker [1]

Clearances and orientation

Installation clearances
approx. 20 cm to the side and approx. 50 cm above and below the unit [1]
Mounting orientation
The recommended installation position is to be adhered to vertical. [1]

Not in the manual: Grounding, Communication

Page 1 of 2 · Installation values · ? means nothing is recordedAggregated, often community-reported information, not official documentation. Do not rely on it for installation, purchase or compliance decisions; always confirm values with the manufacturer’s official documentation. Charged Reviews accepts no responsibility for errors.

Charged Reviews · Quick reference

MPP Solar MPI 10K 10kW 48V 400V Three-Phase Hybrid Inverter · MPI 10K

Warranty

Warranty term?
Optional extension?
Coverage starts?
Coverage conditions?
Remedy?
Labor and shipping?
Transfer to another owner?
Registration?
Territory?

Certifications and listings

UL 1741?
UL 1741 SA?
UL 1741 SB?
IEEE 1547?
CA Rule 21?
UL 9540?
FCC Part 15?

Documents and sources

  1. MPP Solar user manual: MPI 10K Hybrid PV Inverter (October 15, 2026 capture) Manufacturer user manual (PDF) · Checked Oct 15, 2026 http://www.mppsolar.com/manual/MPI%2010K%20HYBRID%203-PHASE/10k%20hybrid%20inverter%20manual.pdf
  2. MPP Solar Download Center (October 15, 2026 capture) Manufacturer download page (HTML capture) · Checked Oct 15, 2026 https://www.mppsolar.com/v3/download/
  3. MPP Solar catalog: MPI Hybrid Series 5K, 5.5K, 10K (October 15, 2026 capture) Manufacturer datasheet (PDF) · Checked Oct 15, 2026 https://www.mppsolar.com/v3/catalogs/MPI%20HYBRID.pdf

Unofficial reference. Information may be incorrect. This sheet aggregates the public sources listed above, much of it community-reported. It is not official manufacturer documentation, not an installation guide and not a compliance record. Community-reported values are checked against official manufacturer information before publication; we cannot guarantee accuracy or completeness. Do not rely on this sheet for installation, purchase or compliance decisions: always confirm every value with the manufacturer’s official documentation before buying, wiring or installing equipment. Charged Reviews accepts no responsibility for errors or omissions. Manufacturers can submit documents or corrections.

Page 2 of 2 · Charged Reviews LLC · chargedreviews.com/inverters/mpp-solar-mpi-10kSome links pay us a commission. That does not affect what we record.