About brandKriëger (Krieger Electric) makes modified and pure sine wave power inverters from 1100 to 4000 watts, step-up and step-down 110 to 220V voltage transformers, surge protectors, jump starters and plug adapters, under its own brand and as private label. It lists a corporate office in Boca Raton, Florida.
SKU detail
locator: Page heading and breadcrumb
conditions: Kriëger’s product page captured on September 23, 2026 is headed "KR4000" under "Home Power Inverters KR4000".
Printed as "Item Weight 11.4 lbs." in the KR4000 - 4000 Watt Power Inverter | Krieger Electric (September 23, 2026 capture); the maker prints pounds only, converted to kilograms. Revised on 30 September 2026: The maker prints this weight in pounds only; the stored kilograms were an unlabeled conversion, now labeled with the printed pounds kept (Project Manager, September 30, 2026).
Where: Specifications, Item Weight
Sources
Converted: 11.4 lb x 0.45359237 kg/lb, rounded to 0.01 kg
Printed as "Surge Capacity (Peak Power) 8000W" in the KR4000 specification table of Krieger's KR3000/KR4000 manual, refetched on September 25, 2026. The manual prints no duration and states that its specifications are typical at nominal line, half load and 77°F (25°C).
Printed as "Rated Output AC (V, A) 115V +/- 10%, 34.8A" in the KR4000 table of Kriëger’s manual captured on September 23, 2026. The product page prints no output voltage.
W 193.5 × H 139.7 × L 393.7 mm / W 7.62 × H 5.5 × L 15.5 in
Printed as "Inverter Dimensions (L x W x H) 15.50 x 7.62 x 5.50 in." on Kriëger’s product page captured on September 23, 2026; converted from inches. The manual prints 15.08 x 5.67 x 4.88 inches instead.
Where: Specifications, Inverter Dimensions (L x W x H)
Sources
Converted: 15.5 x 7.62 x 5.5 in x 25.4 mm/in, rounded to 0.1 mm
Printed as "Efficiency Up to 90%" on Kriëger’s product page captured on September 23, 2026; the manual prints "Optimum Efficiency 90% min." No load point is stated.
Printed as "8000 Watts Peak Power" on Kriëger’s product page captured on September 23, 2026; the manual prints "Surge Capacity (Peak Power) 8000W". No surge duration is stated.
One ANL type fuse and fuse holder close to the positive battery bank terminal
Printed as "installing one ANL type fuse and fuse holder close to the positive battery bank terminal" in the Kriëger KR3000 / KR4000 Power Inverter manual (English) (PDF page 10). The recommended gauges table on the same page prints "KR4000 0AWG (3 ft. included W/ 400A inline ANL Fuse)".
Where: PDF page 10, Cable Gauges, Warning: danger of battery explosion, install a fuse
Printed as "KR4000: Jacketed No. 8 Gauge copper 2-wires" in the Kriëger KR3000 / KR4000 Power Inverter manual (English) (PDF page 7). For the hardwire AC connection.
Where: PDF page 7, Hardwire Instructions, recommended gauge wires
Printed as "Input Voltage Range 10.5 to 15.5 VDC +/- 0.3V" in the Kriëger KR3000 / KR4000 Power Inverter manual (English) (PDF page 17). Printed with a tolerance of +/- 0.3V.
Where: PDF page 17, Specifications: KR4000, Input Voltage Range row
This model, KR3000 / KR4000, has been performance tested by MET and complies with Underwriter’s Laboratories and Canadian Standards Association safety standards.
Printed verbatim in Kriëger’s KR3000/KR4000 manual captured on September 23, 2026 and recorded as the manufacturer’s claim. It names MET as the testing body but no standard number, file number or listing mark; the product page names no certification. No MET directory record was read.
Printed as "Output Continuous Watts (W) 4000W +10W(USB)" in Kriëger KR3000 / KR4000 Power Inverter manual (English), Kriëger KR3000 / KR4000 owner's manual, KR4000 Specifications (PDF page 17), "Output Continuous Watts (W)" row. Revised on 1 October 2026: The owner's manual, which ranks above the product page, prints 4000 W continuous output plus 10 W from USB; the stored kilowatt value is the AC figure divided by 1,000.
Printed as "Input Voltage Range 10 – 15.5 VDC" on Kriëger’s product page captured on September 23, 2026. The KR3000/KR4000 manual prints "10.5 to 15.5 VDC +/- 0.3V" instead; the product page value is recorded.
Printed as "Operating Temperature 0° to 40°C" in Kriëger KR3000 / KR4000 Power Inverter manual (English), Kriëger KR3000 / KR4000 owner's manual, KR4000 Specifications (PDF page 17), "Operating Temperature" row. Revised on 1 October 2026: The manual row is labeled Operating Temperature; the word Max before it belongs to the touch temperature row above.
10.64 L* (Calculated from published dimensions)W: 193.5 × H: 139.7 × L: 393.7 mm / W: 7.62 × H: 5.5 × L: 15.5 inWeight5.17 kg / 11.4 lb
Evidence score
4/100Missing details30% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificate evidence needed; Battery conversion efficiency needed; Idle consumption needed.
Each input is scored against the best documented value for an inverter: warranty term and battery conversion efficiency against every published inverter, idle consumption (lower is better) against the inverters in the same output band, or against every published inverter when the output is not documented. A documented value always earns points; an undisclosed one earns 0 and is listed as missing. Researched products receive a score. Certificates earn points for the evidence itself. Size and weight do not affect scores.
Warranty term3 years3.6 / 30.0
3 of 25 years, the best documented for an inverter (printed by the maker): APsystems DS3
Printed as "Warranty 3 Year" on Kriëger’s product page captured on September 23, 2026; the manual states the warranty period lasts for 36 months from the date of purchase for the original end user and names PowerBright as the warrantor.
Research pending, 0 points: Certificates, Battery conversion efficiency, Idle consumption.
Warranty term and battery conversion efficiency are compared with every published inverter; idle consumption with the inverters in the same 3.5 to 7 kW output band. · Method version 0.5
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
Unknownmanufacturer claimpresent at observation[2]
Scope
equipment listing
Covered models
KR3000; KR4000
Limitations
Kriëger’s KR3000/KR4000 manual prints "This model, KR3000 / KR4000, has been performance tested by MET and complies with Underwriter’s Laboratories and Canadian Standards Association safety standards." It names MET Laboratories as the testing body but no standard number, file number or listing mark, so the standard is left empty rather than supplied from assumption. The product page names no certification. This is the manufacturer’s claim as printed; no MET directory record was read and nothing beyond the claim is established.
PowerBright will, at its option, repair or replace the defective product free of charge, provided that you notify PowerBright of the product defect within the Warranty Period, and provided that PowerBright, through inspection, establishes the existence of such a defect and that it is covered by this Limited Warranty.
Printed as "PowerBright will, at its option, repair or replace the defective product free" in the Kriëger KR3000 / KR4000 Power Inverter manual (English) (PDF page 18).
Where: PDF page 18, Warranty and Return, What will PowerBright do?
Covers defects in workmanship and materials in your KR3000 / KR4000
Printed as "covers defects in workmanship and materials in your KR3000 / KR4000" in the Kriëger KR3000 / KR4000 Power Inverter manual (English) (PDF page 18). The Limited Warranty is provided by PowerBright.
Where: PDF page 18, Warranty and Return, What does this warranty cover?
The date of purchase at the point of sale to the original end user customer
Printed as "36 months from the date of purchase at the point of sale to you" in the Kriëger KR3000 / KR4000 Power Inverter manual (English) (PDF page 18). The warranty is provided by PowerBright. Printed in full as "This warranty period lasts for 36 months from the date of purchase at the point of sale to you, the original end user customer."
Where: PDF page 18, Warranty and Return, What does this warranty cover?
Printed as "Warranty 3 Year" on Kriëger’s product page captured on September 23, 2026; the manual states the warranty period lasts for 36 months from the date of purchase for the original end user and names PowerBright as the warrantor.
PowerBright covers both parts and labor necessary to repair the product, and return shipment to the customer via a PowerBright selected non-expedited surface freight within the contiguous United States and Canada. Alaska and Hawaii are excluded.
Printed as "PowerBright covers both parts and labor necessary to repair the product", "surface freight within the contiguous United States and Canada" and "Alaska and Hawaii are excluded" in the Kriëger KR3000 / KR4000 Power Inverter manual (English) (PDF page 18).
Where: PDF page 18, Warranty and Return, What will PowerBright do?
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-23.
Location: KR4000 Specifications table; opening "Welcome" section; Warranty and Return
Retrieved Sep 22, 2026
Kriëger’s owner’s manual for the KR3000 and KR4000, linked as "KR3000_4000 Manual (English)" on its Manuals page and captured byte for byte on September 23, 2026. It prints a separate KR4000 specification table, read here for AC output voltage, frequency and operating temperature, and the MET, UL and CSA sentence recorded as a claim. The file name suggests a 2017 revision but the document prints no revision or date. Several of its KR4000 figures (input range 10.5 to 15.5 VDC, dimensions 15.08 x 5.67 x 4.88 in, weight 9.48 lbs, no-load current under 0.9A) differ from the current product page; the product page values are recorded and the manual’s are noted. Its warranty section names PowerBright as the warrantor.
Archived copies
Archived copy of a document published by Kriëger. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Kriëger’s own product page for the KR4000 on kriegermfg.com, captured byte for byte on September 23, 2026. It establishes what Kriëger published on the access date: the model heading, the "General Details" feature list and the "Specifications" table, from which the output ratings, input voltage range, efficiency, dimensions, weight and warranty term recorded here are read, and the product images. It carries no revision or issue date and names no safety standard.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-23.
Location: Page body
Retrieved Sep 22, 2026
Kriëger’s About Us page, captured on September 23, 2026, read only for the brand description (own brand and private label manufacturing; modified and pure sine wave inverters from 1100 to 4000 watts, voltage transformers and other power products). Its company-wide ISO 9001, RoHS, MET, UL and CSA statement is not applied to any product.
Kriëger KR3000 / KR4000 Power Inverter manual (English)
Archived copy of a document published by Kriëger. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].