Quick reference

Read from "Input voltage range (VAC) 185-265 V" (manual) and "185-265V" (datasheet).

Location: Manual 8. Specification, Input voltage range (VAC) row; datasheet page 2

The manual prints "Charge algorithm 7 stage adaptive" and "Charge curve, Li-Ion 4 stage, with on-off control or CAN-bus control"; the datasheet prints "Charge algorithm, Li-Ion 3 stage, with on-off control or CAN bus control" and calls the charger Li-Ion (LiFePO4) ready; Victron's API prints chargeAlgorithmLithium "Three stage, with on-off control or CAN-bus control". The stage count differs between the documents and is not part of the value.

Location: Manual 8. Specification, Charge algorithm and Charge curve, Li-Ion rows; datasheet page 2

The datasheet is titled "Skylla-i Battery Charger 24V"; the first figure of the model name is the nominal battery voltage; the manual's footnote gives the output voltage range 20-36 V.

Location: Datasheet title; model name; manual 8. Specification footnote 1

Main charge current, up to 40 °C ambient (reduces to 80 % at 50 °C and 60 % at 60 °C). The (1+1) model adds a starter battery output printed as 4 A; the datasheet describes it as "limited to approximately 4A and with a slightly lower output voltage". Victron's API prints 80 A for SKI024080000.

Location: Manual 8. Specification, Charge current row, 24/80 (1+1) column; datasheet page 2, Charge current row, 24/80 (1+1) column; API field chargeCurrentNominal

Printed in the manual's specification table, one cell for all models; the datasheet prints the same battery and AC connections.

Location: Manual 8. Specification, Battery-connection, 230 VAC-connection and VE.Can communication port rows; datasheet page 2

Printed as 405 x 250 x 150 mm (16.0 x 9.9 x 5.9 in) in the manual and the datasheet, one cell for all models. The other cited Victron documents, including the API rows for SKI024080000, print the same.

Location: Manual 8. Specification, Dimensions row; datasheet page 2, Dimensions row (one cell for all models)

Printed as "IP 21".

Location: Manual 8. Specification, Protection category; datasheet page 2

Printed in the manual and the datasheet, one cell for all models; power factor 0,98. The maximum AC input current row prints two figures (16 A, 20 A) for four models and is not read here.

Location: Manual 8. Specification, Input voltage rows; datasheet page 2

Printed in the manual and the datasheet, one cell for all models.

Location: Manual 8. Specification, Operating temp. range row; datasheet page 2

Printed as 28,8 V absorption, 27,6 V float and 26,4 V storage (decimal commas as printed), adjustable with the rotary switch or potentiometers; the datasheet prints the same.

Location: Manual 8. Specification, charge voltage rows (one cell for all models); datasheet page 2

Printed under Standards, Safety: the standards Victron names; no certificate is recorded here.

Location: Manual 8. Specification, Standards, Safety row; datasheet page 2

Printed as 7 kg (16 lbs) in the manual and the datasheet, one cell for all models. The other cited Victron documents, including the API row for SKI024080000, print the same.

Location: Manual 8. Specification, Weight row; datasheet page 2, Weight row (one cell for all models)