Quick reference

Read from "Input voltage range 185 - 265 Vac, full output power available". The datasheet's 48/50 TG column prints 185-264 V AC (kept as an alternative).

Location: Manual 6.2 Input, Input voltage range

The first figure of the model name 48/50 is the nominal battery voltage; the manual lists the type as "48V / 50A".

Location: Manual 2.1 charge voltage table; model name

Battery charge current (maximum output current), up to 40 °C ambient; the manual prints the starter battery current as "n/a" in the TG 48/50 column (Victron's API prints chargeCurrentStarter 4 A, not used). Maximum output power is printed as 3000W. Victron's API prints 50 A for SDTG4800501.

Location: Manual 6.3 Output, Maximum output current row, TG 48/50 column; datasheet page 2, Charge current house batt. row, 48/50 TG column; API field chargeCurrentNominal

Printed in the first (single-phase) value column of the manual's mechanical table. The datasheet prints M8 studs and a screw-clamp 2,5 mm² (AWG 6) AC connection (one cell for all models).

Location: Manual 6.4 Mechanical, single-phase column: Input 230Vac connection, Battery connection and Starter battery connection rows

The manual's mechanical table heads four models (TG 24/80, TG24/100, TG48/50, TG 24/100 3-Ph) over two value columns; the first, 368 x 250 x 257mm, is the single-phase cabinet, as the manual's dimension drawings are titled "Skylla-TG 24/80, 24/100 and Titan 48/50" and "Skylla-TG 24/100 3-Phase". Differing Victron values kept as alternatives: Victron's API prints 365 x 250 x 257 mm.

Location: Manual 6.4 Mechanical, Dimensions row, single-phase column (TG 24/80, TG24/100, TG48/50)

Printed as "IP 21" in the manual's mechanical table and in the datasheet's one cell for all models.

Location: Manual 6.4 Mechanical, Protection row; Datasheet page 2, Protection category (one cell for all models)

Printed as "Input voltage range 185 - 265 Vac, full output power available". The datasheet's 48/50 TG column prints input voltage 230 V AC, range 185-264 V AC and DC input 180-400 V (kept as an alternative).

Location: Manual 6.2 Input, Input voltage range and Frequency range rows

Printed as "85 % at 230Vac and 60Vdc 50A" for the 48/50.

Location: Manual 6.1 General, Efficiency row, 48/50

Printed as "Temperature range 0 °C until +40 °C, decreasing output power if temperature > +40ºC". The datasheet prints -40 to +50°C (kept as an alternative).

Location: Manual 6.1 General, Temperature range row

Printed as "48V / 50A 57 Vdc 53 Vdc 50 Vdc" under the columns Boost voltage, Float voltage, Minimal voltage (decimal commas as printed).

Location: Manual 2.1 charge voltage table, 48V / 50A row

Printed under Standards, Safety in one cell for all models: the standards Victron names; no certificate is recorded here. The manual prints "Safety EN 60335-2-29 (1991)".

Location: Datasheet page 2, Standards, Safety row; manual 6.1 General, Safety row

The manual prints "Weight 9.8 Kg 23 Kg" over the same two columns; 9.8 Kg is the single-phase cabinet (23 Kg the 3-phase). Differing Victron values kept as alternatives: Victron's API prints 10 kg.

Location: Manual 6.4 Mechanical, Weight row, single-phase column (TG 24/80, TG24/100, TG48/50)