Quick reference

The model is printed as "Cyrix-Li-ct 12/24-230" in the datasheet header; the API prints '12V or 24V (automatic detection)' for CYR010230412.

Location: Datasheet page 1, model header (Cyrix-Li-ct 12/24-230); API field nominalBatteryVoltage

The datasheet prints that several VE.Bus BMS controllable Cyrix switches are available to shut down loads or chargers the BMS cannot control directly; the Cyrix-Li-ct parallel connects a lead acid starter battery and a LiFePO4 battery when the VE.Bus BMS charge disconnect output is high and it senses 13,4V (resp. 26,8V) or more, and disengages below 13,2 V; its functionality is analogous to the Cyrix-ct. The control input row is printed once: "The Cyrix engages when the control input is high (appr. Battery voltage) The Cyrix disengages when the control input is left free floating or pulled low".

Location: Datasheet page 1, model header and Cyrix-Li-ct description; API field controlInput

Printed as 65 x 100 x 50 mm once for every model. Victron's API prints the same for CYR010230412.

Location: Datasheet page 1, Dimensions h x w x d (printed once for every model); API fields height, width, depth

Printed as IP54 once for every model.

Location: Datasheet page 1, Protection category (printed once for every model); API field protectionCategory

Printed once for the Cyrix-Li-load, Cyrix-Li-Charge and Cyrix-Li-ct columns as the continuous current and breaking capacity at 12 V or 24 V (230 A). The 230 A table prints the second cell as "230.A".

Location: Datasheet page 1, Continuous current and breaking capacity at 12 V or 24 V row (one cell spanning the Cyrix-Li-ct columns); API field continuousCurrent1224

Printed as 0,27 kg once for every model. Victron's API prints 0.27 kg for CYR010230412.

Location: Datasheet page 1, Weight (printed once for every model); API field weight