About brandUnirac, based in Albuquerque, New Mexico, makes solar racking and mounting systems for pitched roofs, flat roofs and ground mounts. Its Unirac Story page says it has supported over 2.5 million installations and more than 25 gigawatts of solar capacity in North America.
SKU detail
locator: Part table row
conditions: Unirac's MLPE TIGER CLIP cut sheet prints "008115M MLPE TIGER CLIP"; Unirac's METAL X cut sheets prints "008115M MLPE TIGER CLIP".
Clips onto the module return flange (return flanges 0.24 inches thick or less)
Printed as "Push the Tiger Clip onto the module's return flange by pressing down on the opposite end of the Clip." in Unirac's TIGER CLIP Installation Guide (PDF page 4). The manual applies to this model: Tiger Clip Installation Guide product overview names TIGER CLIP MLPE ASSEMBLY (P/N: 008115M) (PDF page 3).
Unirac's own manual, captured October 15, 2026 with the paced research fetcher (robots.txt read first). Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by Unirac. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-24.
Location: Part table
Retrieved Sep 23, 2026
Unirac cut sheet (part and assembly drawings) from unirac.com. Each sheet prints a part table (P/N and DESCRIPTION) and nominal drawing dimensions; the sheets say "ALL DIMENSIONS ARE NOMINAL" and "DRAWING NOT TO SCALE". Drawing dimensions are not recorded as product dimensions because the extracted text does not tie each figure to a labeled axis. No weights or prices are read from it.
Archived copies
Archived copy of a document published by Unirac. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-24.
Location: Part tables
Retrieved Sep 23, 2026
Unirac cut sheet (part and assembly drawings) from unirac.com. Each sheet prints a part table (P/N and DESCRIPTION) and nominal drawing dimensions; the sheets say "ALL DIMENSIONS ARE NOMINAL" and "DRAWING NOT TO SCALE". Drawing dimensions are not recorded as product dimensions because the extracted text does not tie each figure to a labeled axis. No weights or prices are read from it.
Archived copies
Archived copy of a document published by Unirac. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Unirac. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Unirac. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by Unirac. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].