About brandProfessional Solar Products (ProSolar), established in 1989 in Oxnard, California, makes the RoofTrac rail and clamp mounting system, the GroundTrac ground mount system and the FastJack and TileTrac roof attachments.
SKU detail
locator: Page 1 part numbers
conditions: ProSolar prints "Part # TT-18-T4" in its TileTrac brochure (February 2017).
Printed as "Aluminum and Stainless Steel components for maximum corrosion resistance and strength", "Includes Stainless Steel tile flashing" and "Includes aluminum subflashing for double flashing".
Concrete tile roof attachment to the rafter, 4 in tall threaded stud
ProSolar prints "TileTrac® for flat concrete tile (4” Tall Threaded Stud) Part # TT-18-T4" and describes TileTrac as a "Concrete Roof Tile Structural Attachment" used with its RoofTrac rail. The brochure says "*Not recommended for clay or slate tiles." and that its installation steps cover both S-curve and flat concrete tile.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
StandardEvidenceStatusSource
UL 2703manufacturer claimpresent at observation[1]
Scope
system
Covered models
TT-18-T4
Limitations
ProSolar prints "TileTrac® was mechanically tested to the UL2703 standard" and "UL2703 system tested with ProSolar® RoofTrac® rail to 45 psf" in its February 2017 brochure, beside Intertek control number 4007217, and says TileTrac is tested and approved only with the RoofTrac rail system. The brochure also names ASTM D7349 waterproof testing, a test method rather than a certification. Recorded as a manufacturer claim about the RoofTrac system; no issuer directory was checked.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-24.
Location: Page 1 part numbers and benefits; page 2 installation steps
Retrieved Sep 23, 2026
ProSolar brochure dated February 2017, linked from its TileTrac and Brochures pages. It prints the TileTrac box part numbers TT-18-T4 and TT-18-T6, the stud heights, materials, and ProSolar's own statement about UL 2703 mechanical testing with the RoofTrac rail. It says TileTrac is not recommended for clay or slate tiles.
Archived copies
Archived copy of a document published by ProSolar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
ProSolar TileTrac brochure (February 2017)
Archived copy of a document published by ProSolar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].