About brandPowerField Energy Inc. of Falls Church, Virginia makes the PowerRack, a ballasted high-density polyethylene solar ground mount that its product page describes as made in the USA.
SKU detail
locator: Specification sheet header
conditions: Printed as "PowerRack 1200" at the head of PowerField Energy's technical specification sheet; the maker prints no separate part number.
Printed as "Wind: 135 mph (ASCE 7-22/7-16)" and "Snow: 200+ psf (9,500+ Pa)"; the sheet adds that structural capacities meet code-based loads and site-specific engineering, and that ballast weights are guides only.
W 650 × H 757.8 × L 1,117.6 mm / W 25.6 × H 29.83 × L 44 in converted
Printed as "Overall Length 44.0 in 1117.6 mm", "Overall Width 25.59 in 650 mm" and "Top Edge Height 29.84 in 757.8 mm"; the sheet also prints Low Edge Height 14.0 in (355.7 mm), Tilted Mounting Length 46.3 in (1176.1 mm) and Bottom Base Length 31.83 in (808.6 mm).
Fixed-tilt ballasted ground mount, landscape module orientation, no ground penetration
Printed as "Application: Fixed-Tilt Ground-Mount" and "Orientation: Landscape"; page 2 says the ballasted racks "effectively anchors the modules to the ground without penetrating the surface".
PowerField Energy's own two-page PowerRack 1200 technical specification sheet (February 2026), captured October 3, 2026. Manufacturer claims, not independent tests.
Archived copies
Archived copy of a document published by PowerField Energy Inc.. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by PowerField Energy Inc.. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].