Charged Reviews

Quick reference

NOCO GENPRO10X2 12V 2-Bank 20A On-Board Battery Charger

Model: GENPRO10X2 · SKU: GENPRO10X2

Prepared Nov 12, 2026

Common specifications

Charger inputNot documented
Input voltage
100-240VAC, 50-60HzNeeds confirmationSource See note below[1]
Solar input voltageNot documented
Solar input limitNot documented
Output voltage
VariousSource [1]
Battery voltage
12VSource [1]
Charge current
10 ASource [1, 2]
Battery chemistry
Wet, Gel, MF, CA, EFB, AGM, Calcium, LithiumSource [1]
Power
300 WSource [1, 2]
IsolatedNot documented
Engine detectionNot documented
Weight
3.27 kg7.21 lb convertedNeeds confirmationSource See note below[1, 2]
Enclosure volumeNot documented
Warranty termNot documented

All recorded specifications

Battery chemistry
Wet, Gel, MF, CA, EFB, AGM, Calcium, LithiumDocumented claim
Conditions

Printed as "Wet, Gel, MF, CA, EFB, AGM, Calcium, Lithium". The About paragraph reads: "The GENPRO Series on-board battery charger is designed for charging all types of 12V lead-acid batteries, including Wet (Flooded), Gel, MF (Maintenance-Free), CA (Calcium), EFB (Enhanced Flooded Battery), and AGM (Absorption Glass Mat), in addition to 12V Lithium (LiFePO4) batteries." The 12V LITHIUM mode is "For use on batteries with Battery Management Systems (BMS) only."

Location: User guide page 6, Battery Chemistries, GENPRO10X2 column; About GENPRO Series paragraph

Printed as "Wet, Gel, MF, CA, EFB, AGM, Calcium, Lithium". The About paragraph reads: "The GENPRO Series on-board battery charger is designed for charging all types of 12V lead-acid batteries, including Wet (Flooded), Gel, MF (Maintenance-Free), CA (Calcium), EFB (Enhanced Flooded Battery), and AGM (Absorption Glass Mat), in addition to 12V Lithium (LiFePO4) batteries." The 12V LITHIUM mode is "For use on batteries with Battery Management Systems (BMS) only."

Location: User guide page 6, Battery Chemistries, GENPRO10X2 column; About GENPRO Series paragraph

[1]
Battery voltage
12VDocumented claim
Conditions

Printed as "12V". The archived specs page prints "Voltages: 12 Volts".

Location: User guide page 6, Type of Batteries, GENPRO10X2 column

Printed as "12V". The archived specs page prints "Voltages: 12 Volts".

Location: User guide page 6, Type of Batteries, GENPRO10X2 column

[1]
Charge current
10 ADocumented claim
Conditions

Per bank. The user guide prints "Charging Current: 10Ax2(12V)" with "Banks: 2"; the sell sheet prints "CURRENT PER BANK: 10A" and "CHARGING CURRENT: 20A" for GENPRO10X2; the archived specs page prints "Charging Current: 10 Amps DC x 2 Banks".

Location: User guide page 6, Charging Current and Banks, GENPRO10X2 column; sell sheet CURRENT PER BANK row

Per bank. The user guide prints "Charging Current: 10Ax2(12V)" with "Banks: 2"; the sell sheet prints "CURRENT PER BANK: 10A" and "CHARGING CURRENT: 20A" for GENPRO10X2; the archived specs page prints "Charging Current: 10 Amps DC x 2 Banks".

Location: User guide page 6, Charging Current and Banks, GENPRO10X2 column; sell sheet CURRENT PER BANK row

[1, 2]
Input voltage
100-240VAC, 50-60HzNeeds confirmationThe GENPRO Series user guide (10.30.2024A, page 6, GENPRO10X2 column) prints "100-240VAC, 50-60Hz" and the sell sheet (10.30.2024) "100-240 VAC, 50-60Hz"; the archived GENPRO10X2 specs page prints "Line Voltage: 120V to 240V AC". The user guide's value is recorded.
Conditions

Printed as "100-240VAC, 50-60Hz" in the user guide's Technical Specifications.

Location: User guide page 6, Technical Specifications, Input Voltage AC, GENPRO10X2 column

Printed as "100-240VAC, 50-60Hz" in the user guide's Technical Specifications.

Location: User guide page 6, Technical Specifications, Input Voltage AC, GENPRO10X2 column

[1]
Output voltage
VariousDocumented claim
Conditions

The user guide prints "Charging Voltage: Various" because the voltage depends on the selected mode. The user guide's Charging Modes table (peak voltage measured at 25 degrees C) prints 12V 14.5V, 12V AGM 14.8V and 12V LITHIUM 14.6V, each at 10A for batteries up to 230Ah, and 12V REPAIR "16.5V | 1.5A | Any Capacity".

Location: User guide page 6, Charging Voltage, GENPRO10X2 column; page 3, Charging Modes

The user guide prints "Charging Voltage: Various" because the voltage depends on the selected mode. The user guide's Charging Modes table (peak voltage measured at 25 degrees C) prints 12V 14.5V, 12V AGM 14.8V and 12V LITHIUM 14.6V, each at 10A for batteries up to 230Ah, and 12V REPAIR "16.5V | 1.5A | Any Capacity".

Location: User guide page 6, Charging Voltage, GENPRO10X2 column; page 3, Charging Modes

[1]
Power
300 WDocumented claim
Conditions

Printed as "300 W" in the sell sheet's OUTPUT POWER row for GENPRO10X2. The user guide prints the rating per bank as "150x2 W Max" and gives no single total; the archived specs page prints "Power Consumption: 150 Watts x 2 Banks (300 Watts Max)".

Location: Sell sheet model table, OUTPUT POWER, GENPRO10X2 column; user guide page 6, Output Power

Printed as "300 W" in the sell sheet's OUTPUT POWER row for GENPRO10X2. The user guide prints the rating per bank as "150x2 W Max" and gives no single total; the archived specs page prints "Power Consumption: 150 Watts x 2 Banks (300 Watts Max)".

Location: Sell sheet model table, OUTPUT POWER, GENPRO10X2 column; user guide page 6, Output Power

[1, 2]
Weight
3.27 kg7.21 lb convertedNeeds confirmation7.2 lb x 0.45359237 kg/lb, rounded to 0.01 kgThe GENPRO Series user guide (10.30.2024A, page 6) and sell sheet (10.30.2024) print 7.2 pounds for GENPRO10X2; the archived GENPRO10X2 specs page prints "Weight: 8.74lb (3.96kg)". The user guide's value is recorded.
Conditions

Printed as "7.2 Pounds" in the user guide; converted from pounds. The sell sheet prints "7.2 lbs (3.27 kg)".

Location: User guide page 6, Weight, GENPRO10X2 column

Printed as "7.2 Pounds" in the user guide; converted from pounds. The sell sheet prints "7.2 lbs (3.27 kg)".

Location: User guide page 6, Weight, GENPRO10X2 column

[1, 2]

Warranty

Term years
3 yearsDocumented claim
Conditions

Printed as "NOCO Three (3) Year Limited Warranty". The archived specs page prints "3-Year Limited Warranty".

Location: User guide, warranty section heading

Printed as "NOCO Three (3) Year Limited Warranty". The archived specs page prints "3-Year Limited Warranty".

Location: User guide, warranty section heading

[1]

Certificate records

No records documented.

Sources and revisions

  1. NOCO GENPRO Series On-Board Battery Charger User Guide & Warranty (North America, GENPRO10X1 to GENPRO10X4, dated 10.30.2024A in its file name)Official warranty · Revision 10.30.2024A · Checked https://no.co/media/wysiwyg/downloads/User_Guides/GEN/GENPRO_Series_NA_User_Guide_10.30.2024A.pdf
  2. NOCO GENPRO Series sell sheet (GENPRO10X1 to GENPRO10X4, dated 10.30.2024 in its file name)Official document · Revision 10.30.2024 · Checked https://no.co/media/wysiwyg/downloads/brochures/GEN/GENPRO_Sell_Sheet_10.30.2024.pdf
  3. NOCO GENPRO10X2 Tech Specs page (no.co/genpro10x2/specs, Internet Archive copy of February 19, 2026)Official product page · Checked https://web.archive.org/web/20260219011014id_/https://no.co/genpro10x2/specs