Charged Reviews

Quick reference

Magnum Energy ME-AGS-N Auto Generator Start (Network)

Model: ME-AGS-N · SKU: ME-AGS-N

Prepared Nov 12, 2026

Report an issue

Find a specification

Common specifications

Device type	Automatic generator start controller (networked)Source [1, 2]
Communications	Not documented
Supported devices	ME; MM; MMS; MS; MS-PAE; MS-PE; MSH; RDSource [2]
Ports	NETWORK port, RJ14 (6P6C), for the network communication cable; REMOTE port, RJ14 (6P6C), for the remote temp sensor cable; 8-port friction-fit wiring terminal block for power and the generator start/stop and run sense wiresSource [1]
Display	Not documented
Power input	12, 24 or 48 V DC battery system (set by the Input DC Voltage Jumper)Source [1]
Mounting	Shelf or wall, any direction, with four #8 x 3/4 screwsSource [1]
Enclosure	Not documented
Operating temperature	Not documented
Weight	Not documented
Dimensions	Not documented
Enclosure volume	Not documented
Warranty term	Not documented

All recorded specifications

Device type	Automatic generator start controller (networked)Documented claim Conditions The ME-AGS-N Owner's Manual says "A separate remote control (e.g., ME-RC, ME-ARC, or ME-RTR) is required to configure the AGS" and that the controller autostarts and autostops the generator; the DMX Power page names it Auto Generator Start Accessory Network. Location: PDF page 8, 1.1 AGS-N System Requirements The ME-AGS-N Owner's Manual says "A separate remote control (e.g., ME-RC, ME-ARC, or ME-RTR) is required to configure the AGS" and that the controller autostarts and autostops the generator; the DMX Power page names it Auto Generator Start Accessory Network. Location: PDF page 8, 1.1 AGS-N System Requirements Official instruction manual · ME-AGS-N Owner's Manual (64-0039 Rev F, October 2025) (November 2, 2026 capture)Official product page · DMX Power Auto Generator Start (Network) page (November 2, 2026 capture) [1, 2]
Included equipment	ME-AGS-N controller; 10 ft network communication cable; 60 ft remote temp sensor cable; #8 x 3/4 mounting screws (4); Warning label; ME-AGS-N Owner's ManualDocumented claim Conditions The shipped contents as the ME-AGS-N Owner's Manual lists them. Location: PDF page 8, 1.2 AGS-N Components The shipped contents as the ME-AGS-N Owner's Manual lists them. Location: PDF page 8, 1.2 AGS-N Components Official instruction manual · ME-AGS-N Owner's Manual (64-0039 Rev F, October 2025) (November 2, 2026 capture) [1]
Mounting	Shelf or wall, any direction, with four #8 x 3/4 screwsDocumented claim Conditions Printed as "The AGS controller can be mounted in any direction" in the ME-AGS-N Owner's Manual, which says to mount it using the four supplied #8 x 3/4 screws. Location: PDF page 12, 2.3 Mounting Procedure Printed as "The AGS controller can be mounted in any direction" in the ME-AGS-N Owner's Manual, which says to mount it using the four supplied #8 x 3/4 screws. Location: PDF page 12, 2.3 Mounting Procedure Official instruction manual · ME-AGS-N Owner's Manual (64-0039 Rev F, October 2025) (November 2, 2026 capture) [1]
Ports	NETWORK port, RJ14 (6P6C), for the network communication cable; REMOTE port, RJ14 (6P6C), for the remote temp sensor cable; 8-port friction-fit wiring terminal block for power and the generator start/stop and run sense wiresDocumented claim Conditions Read from the component descriptions in the ME-AGS-N Owner's Manual (Figure 1-1): the NETWORK and REMOTE connection ports (RJ14, 6P6C) and the 8-port wiring terminal block. Location: PDF page 9, 1.3 ME-AGS-N Features, Figure 1-1 Read from the component descriptions in the ME-AGS-N Owner's Manual (Figure 1-1): the NETWORK and REMOTE connection ports (RJ14, 6P6C) and the 8-port wiring terminal block. Location: PDF page 9, 1.3 ME-AGS-N Features, Figure 1-1 Official instruction manual · ME-AGS-N Owner's Manual (64-0039 Rev F, October 2025) (November 2, 2026 capture) [1]
Power input	12, 24 or 48 V DC battery system (set by the Input DC Voltage Jumper)Documented claim Conditions Printed as "Compatible with 12, 24, or 48-volt systems" in the ME-AGS-N Owner's Manual (64-0039 Rev F), which says the Input DC Voltage Jumper position determines the controller's DC operating voltage. Location: PDF page 7, 1.0 Introduction, features Printed as "Compatible with 12, 24, or 48-volt systems" in the ME-AGS-N Owner's Manual (64-0039 Rev F), which says the Input DC Voltage Jumper position determines the controller's DC operating voltage. Location: PDF page 7, 1.0 Introduction, features Official instruction manual · ME-AGS-N Owner's Manual (64-0039 Rev F, October 2025) (November 2, 2026 capture) [1]
Supported devices	ME; MM; MMS; MS; MS-PAE; MS-PE; MSH; RDDocumented claim Conditions The Fits column of the DMX Power page row for the ME-AGS-N lists ME, MM, MMS, MS, MS-PAE, MS-PE, MSH and RD. Location: Page Models & Specifications table, Fits column The Fits column of the DMX Power page row for the ME-AGS-N lists ME, MM, MMS, MS, MS-PAE, MS-PE, MSH and RD. Location: Page Models & Specifications table, Fits column Official product page · DMX Power Auto Generator Start (Network) page (November 2, 2026 capture) [2]

Warranty

Certificate records

No records documented.

Sources and revisions

ME-AGS-N Owner's Manual (64-0039 Rev F, October 2025) (November 2, 2026 capture)Official instruction manual · Revision 64-0039 Rev F · Checked Nov 1, 2026https://dmx-power.com/sites/default/files/document/manual/64-0039-W%20F%20Owner%27s%20Manual%2C%20ME-AGS-N.pdf
DMX Power Auto Generator Start (Network) page (November 2, 2026 capture)Official product page · Checked Nov 1, 2026https://dmx-power.com/catalog/accessories/auto-generator-start-n