About brandK2 Systems develops mounting systems for photovoltaic systems on pitched roofs, flat roofs and ground mounts. Its US company, K2 Systems LLC, is based in Oceanside, California.
Archived copy of the PDF obtained from K2 Systems on 2026-10-29, copied unchanged.
Location: Page 1, part-number table; page 2, Technical Data
Retrieved Oct 29, 2026
K2 Systems' own two-page Solar Fasteners technical sheet (revision "Technical Sheet Solar Fastener US 01 | 0822"). Page 1 lists "4000149 | Solar Fastener 8mm length, 85mm" and "4000167 | Solar Fastener 8mm length, 155mm", both with compatible substructure Metal, for steel substructures 1.5 - 3 mm (thicker if pre-drilled, up to S450GD). Page 2 prints Material "A2 stainless steel, with sealing washer FZD" and load and drilling tables by substructure thickness, which are not recorded. The approval mark on page 1 is a maker claim, not checked with its issuer. Linked under Technical Sheet > EN from K2 Systems' US catalog page for 4000167 (https://catalog.k2-systems.com/en-us/...). Obtained on Oct 29, 2026 with the paced research fetcher (HTTP 200) and copied unchanged into this archive. Manufacturer document, not independent tests.
Archived copies
Archived copy of a document published by K2 Systems. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.
Archived documents
K2 Systems Solar Fasteners technical sheet, US 01 | 0822
Archived copy of a document published by K2 Systems. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].