Charged ReviewsSaved 0Compare 0Login
Solar rackingIronRidge RD Structural Screw
IronRidgeNo maker reviews yet

IronRidge RD Structural Screw

No reviews · Write the first

Key specs

BrandIronRidge
ModelHW-RD1430-01-M1
MarketUS

All specifications

Show all 9 specifications

Identity

BrandIronRidge · Website
ModelHW-RD1430-01-M1
MarketUS
Manufacturer SKUHW-RD1430-01-M1
SKU detail
locator: IronRidge Parts Catalog v3.66, HUG Halo UltraGrip table
conditions: IronRidge prints "HW-RD1430-01-M1 RD Structural Screw" in the HUG Halo UltraGrip table of its IronRidge Parts Catalog v3.66 (files.ironridge.com/IronRidge_Parts_Catalog.pdf).
Sources: [1]
FieldValueConditionsSource
Material300 series stainless steel
Printed in the Property / Value table of IronRidge's QuickMount RD Structural Screw cut sheet, which lists part number HW-RD1430-01-M1.
Where: As cited
[2]
Roof surfaceAsphalt shingle
Printed: "Composition Shingle Mounts", and "HUG™ Halo UltraGrip™", and "HW-RD1430-01-M1 RD Structural Screw". Comp, composition and composite shingle wording (and "Asphalt Roofs") is recorded as Asphalt shingle; "composition & flat rooftops" gives Asphalt shingle only (PM 2026-10-29). The product, table or section name prints the roof surface, which counts as printed words (PM 2026-10-29).
Where: IronRidge Parts Catalog (Version 3.66), v3.66 PDF p.46 (printed p.44) / v3.67 PDF p.45 (printed p.43), heading "Composition Shingle Mounts", HUG Halo UltraGrip table
[1]
Mounting typeRD Structural Screw
Printed as "HW-RD1430-01-M1 RD Structural Screw" in IronRidge Parts Catalog, Version 3.66, Parts Catalog v3.66, Composition Shingle Mounts, HUG Halo UltraGrip table. Revised on 1 October 2026: The catalog prints only "RD Structural Screw" for this part, in the HUG Halo UltraGrip table; it does not say it mounts HUG to rafters or roof deck.
Where: Parts Catalog v3.66, Composition Shingle Mounts, HUG Halo UltraGrip table
[1]
Mounting methodsDriven until the EPDM washer is fully compressed (no torque value); HUG is approved only with these screws
Printed as "Drive each screw, checking to make sure the EPDM washer is fully compressed." in IronRidge's Halo UltraGrip (HUG) Installation Manual, version 1.11 (2026) (PDF page 5). The manual applies to this model: HUG Installation Manual names RD Structural Screws; the cut sheet (https://files.ironridge.com/pitched-roof-mounting/resources/cutsheets/IronRidge_QuickMount_Cut_Sheet_RD_Structural_Screw.pdf) lists HW-RD1430-01-M1 as RD Structural Screw; Parts Catalog v3.66 (https://files.ironridge.com/IronRidge_Parts_Catalog.pdf) PDF page 46 lists HW-RD1430-01-M1 under that product name.
Where: PDF page 5
[3]
Included components(1) Self drilling screw, #14, wood tip; (1) Washer, EPDM backedKit table of IronRidge's RD Structural Screw cut sheet.
Where: As cited
[2]

Owner reviews

No owner reviews yet
Write a review

Sellers

No listed sellers in this data.

Price history

No seller price history.

Evidence score

This category has no Evidence score.

Certificates

What this shows: what each record says and how far it reaches. It does not mean the product is approved.

Unknown: no certification evidence recorded in this data.

Warranty

Unknown: no warranty facts recorded.

Recalls / legal notices

No recalls on file. All notices · Report a notice

This register is incomplete. A missing notice does not establish that a product has no recalls.

Documents

  • Manuals

  • IronRidge: Halo UltraGrip (HUG) Installation Manual, version 1.11 (2026)Official · IronRidge · Official instruction manual · PDF
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Archived copy captured on 2026-10-16.

    Location: Installation instructions

    Retrieved Oct 16, 2026

    IronRidge's own manual, captured October 16, 2026 with the paced research fetcher (robots.txt read first). Manufacturer instructions, not independent tests.

    Archived copies

    Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 1.62 MB

    Archived copy, unaltered, kept as a record of what IronRidge published. Original address: https://files.ironridge.com/pitched-roof-mounting/resources/brochures/IronRidge_QuickMount_HUG_Installation_Manual.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    Pages
    8

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: b0399fbdef30fdb4815b7dce0b4fff7486acc5f48ced5e915410da5409ebe1d4

    Open
  • Other documents

  • IronRidge Parts Catalog, Version 3.66Official · IronRidge · Official document · PDF
    Source details
    Revision
    3.66
    Revision date
    Not stated

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-24.

    Location: Item Number / Description tables by product family

    Retrieved Sep 23, 2026

    IronRidge's own parts catalog as served on September 24, 2026, linked from its product pages as "Product Catalog". It prints item numbers with one-line descriptions and some family-level material and finish statements; it prints no weights or dimensions per part and no prices. Some tables are laid out in two columns, so the extracted text of a row can interleave two parts; where that happens the record says so.

    Archived copies

    Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backup3.66 · 3.59 MB

    Archived copy, unaltered, kept as a record of what IronRidge published. Original address: https://files.ironridge.com/IronRidge_Parts_Catalog.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    Pages
    48

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 3be8eaab17324c6aea67d75143cfaba4dd25e881927691397c9bc6551364e7bf

    Open

Archive and older revisions

Archive and older revisions1

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

  • IronRidge QuickMount Cut Sheet, RD Structural ScrewOfficial · IronRidge · Official document · PDF
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-24.

    Location: Kit table; part number table; Property / Value table

    Retrieved Sep 23, 2026

    One-page drawing with a kit table, part number HW-RD1430-01-M1, material and finish. Drawing dimensions are not recorded.

    Archived copies

    Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 0.28 MB

    Archived copy, unaltered, kept as a record of what IronRidge published. Original address: https://files.ironridge.com/pitched-roof-mounting/resources/cutsheets/IronRidge_QuickMount_Cut_Sheet_RD_Structural_Screw.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    Pages
    1

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: 4348ccb19d10b7d2f5a920ad856bdfca98e8d0685a545a24757da964614f67c4

    Open

Archived documents

IronRidge Parts Catalog, Version 3.66

Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backup3.66 · 3.59 MB

Archived copy, unaltered, kept as a record of what IronRidge published. Original address: https://files.ironridge.com/IronRidge_Parts_Catalog.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
48

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 3be8eaab17324c6aea67d75143cfaba4dd25e881927691397c9bc6551364e7bf

IronRidge QuickMount Cut Sheet, RD Structural Screw

Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 0.28 MB

Archived copy, unaltered, kept as a record of what IronRidge published. Original address: https://files.ironridge.com/pitched-roof-mounting/resources/cutsheets/IronRidge_QuickMount_Cut_Sheet_RD_Structural_Screw.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
1

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 4348ccb19d10b7d2f5a920ad856bdfca98e8d0685a545a24757da964614f67c4

IronRidge: Halo UltraGrip (HUG) Installation Manual, version 1.11 (2026)

Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 1.62 MB

Archived copy, unaltered, kept as a record of what IronRidge published. Original address: https://files.ironridge.com/pitched-roof-mounting/resources/brochures/IronRidge_QuickMount_HUG_Installation_Manual.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
8

Embedded dates are file metadata, not independent proof of publication.

SHA-256: b0399fbdef30fdb4815b7dce0b4fff7486acc5f48ced5e915410da5409ebe1d4

Submit a document

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
HW-RD1430-01-M1

Manufacturer SKU HW-RD1430-01-M1 · US market

No historical observations recorded yet.

Other recorded fields

FieldValueConditionsSource
Evidence breakdownUnknown

Community discussions

No discussions linked yet. Search DIY Solar Forum

Sources

  1. IronRidge Parts Catalog, Version 3.66 (IronRidge · manufacturer · 3.66 · observed Sep 23, 2026)
  2. IronRidge QuickMount Cut Sheet, RD Structural Screw (IronRidge · manufacturer · observed Sep 23, 2026)
  3. IronRidge: Halo UltraGrip (HUG) Installation Manual, version 1.11 (2026) (IronRidge · manufacturer · observed Oct 16, 2026)

Sign in to report an error on this page

Similar products

All with a price