locator: IronRidge Parts Catalog v3.66, FlashFoot2 table
conditions: IronRidge prints "FF2-02-M2 FlashFoot2®, Mill" in the FlashFoot2 table of its IronRidge Parts Catalog v3.66 (files.ironridge.com/IronRidge_Parts_Catalog.pdf).
Aluminum flashing and cap; 300 series stainless steel lag bolt and washer
Read from the Property / Value tables of IronRidge's FlashFoot2 cut sheet v2.10, which covers FF2-02-M2 and FF2-02-B2: aluminum (mill or black) for the flashing and cap assemblies, 300 series stainless steel (clear) for the lag bolt and the EPDM-backed washer. The per-component assignment is read from the table layout of the drawing.
Printed: "Ratings applicable for composition shingle roofs having slopes between 2:12 and 12:12." Comp, composition and composite shingle wording (and "Asphalt Roofs") is recorded as Asphalt shingle; "composition & flat rooftops" gives Asphalt shingle only (PM 2026-10-29). The product, table or section name prints the roof surface, which counts as printed words (PM 2026-10-29).
Twisting on the Cap makes FlashFoot2® ready to mount XR Rails®.; Comes with flashing, lag bolt, and Cap.
Printed as "Twisting on the Cap makes FlashFoot2® ready to mount XR Rails®."; "Comes with flashing, lag bolt, and Cap." in IronRidge Parts Catalog, Version 3.66, Parts Catalog v3.66, Flush Mount, FlashFoot2 page. Revised on 1 October 2026: The catalog prints that the FlashFoot2 "Comes with flashing, lag bolt, and Cap" and is "ready to mount XR Rails"; it does not name a roof covering.
Where: Parts Catalog v3.66, Flush Mount, FlashFoot2 page
Classified from the catalog's printed words: this item (FF2-02-M2) is listed in the Flush Mount section, whose systems the catalog says mount modules on pitched roofs.
Where: IronRidge Parts Catalog v3.66, PDF page 20 (printed page 18), Flush Mount
Composition shingle roofs; flashing slid under the shingle course, lag bolt with bonded washer through the flashing into the rafter
Printed as "Line up pilot hole with flashing hole and insert lag bolt with bonded washer through flashing." in IronRidge's FlashFoot2 Installation Manual, FM-FF2-MAN Rev 1.21 (2022) (PDF page 2). The manual applies to this model: FlashFoot2 Installation Manual (product named in the title); the catalog lists FF2-02-M2 as FlashFoot2, Mill; Parts Catalog v3.66 (https://files.ironridge.com/IronRidge_Parts_Catalog.pdf) PDF page 20 lists FF2-02-M2 under that product name.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
Unknown: no certification evidence recorded in this data.
Warranty
Field
Value
Conditions
Source
Warranty term
25 years
IronRidge's limited warranty runs 25 years from the date of shipment, except that accessories and electrical junction boxes are limited to 10 years, and finishes carry a separate 5-year finish warranty. The document does not list which parts count as accessories; 25 years is recorded here only for structural rails, splices, clamps, roof and ground attachments.
Where: IronRidge Limited Warranties and Disclaimer (Warranty.IronRidge.2025), What is the period of coverage?
IronRidge's own manual, captured October 16, 2026 with the paced research fetcher (robots.txt read first). Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Linked from the Signature Solar product page with link text "none".
Location: IronRidge_Limited_Warranty.pdf
Retrieved Sep 18, 2026
Original PDF preserved byte for byte, found linked from the Signature Solar listing https://signaturesolar.com/iron-ridge-grounding-lug-low-profile-uwbe/. The revision is whatever was published at this URL on the access date; exact variant coverage inside the document was not separately verified and no later revision was checked.
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-24.
Location: Item Number / Description tables by product family
Retrieved Sep 23, 2026
IronRidge's own parts catalog as served on September 24, 2026, linked from its product pages as "Product Catalog". It prints item numbers with one-line descriptions and some family-level material and finish statements; it prints no weights or dimensions per part and no prices. Some tables are laid out in two columns, so the extracted text of a row can interleave two parts; where that happens the record says so.
Archived copies
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-24.
Location: Kit table; part number table; Property / Value tables
Retrieved Sep 23, 2026
Two-page drawing with a kit table, part numbers FF2-02-M2 and FF2-02-B2, and material and finish per component. Drawing dimensions are not recorded.
Archived copies
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Archived copy of a document published by IronRidge. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].