Charged ReviewsSaved 0Compare 0Login
Morningstar SunSaver 6 Solar Controller
Morningstar
Charge controller

Morningstar SunSaver 6 Solar Controller

Charge current6 A
Weight0.23 kg
Max PV voltage30 V
Load output6 A
Max PV current6.5 A

All specifications

Identity

BrandMorningstar · Website
ModelSS-6-12V
MarketUnknown
Manufacturer SKUSS-6-12V
About brandMorningstar Corporation, based in Newtown, Pennsylvania since 1993, makes solar charge controllers and inverters used in off-grid, industrial and hazardous-location power systems worldwide; its datasheets describe the company as employee-owned with well over three million products made.
SKU detail
locator: VERSIONS / Ratings row
conditions: Printed as one of nine current SunSaver PWM versions listed together in the datasheet's own Ratings row.
Sources: [1]
FieldValueConditionsSource
ListingEN60335-1 and EN60335-2-29 (battery chargers)
Printed as "Safety: EN60335-1 and EN60335-2-29 (battery chargers)" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 2.3, the safety standards the SunSaver controllers are stated to comply with. Section 2.3 also lists EMC standards EN61000-6-2:1999 and EN55022:1994. These are the maker's claims as printed, not checked against any directory.
Where: PDF page 7, section 2.3 (Regulatory Information)
[2]
GroundingThe SunSaver is a negative ground controller.; Any one negative conductor can be earth grounded as required.; Grounding is recommended, but not required for correct operation.
Printed as "The SunSaver is a negative ground controller. Any one negative conductor can be earth grounded as required. Grounding is recommended, but not required for correct operation." in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), the section 3.4 notes, for all SunSaver models.
Where: PDF page 12, section 3.4 (Wiring), notes
[2]
Weight0.23 kg
Printed as a single value shared across all nine versions.
Where: Wire Size / Weight / Dimensions block
[1]
PV wire size#10 AWG / 5 mm2 (max.)
Printed as "Power terminals wire size (max.) Solid #10 AWG / 5 mm2 Multistrand #10 AWG / 5 mm2 Fine strand #10 AWG / 5 mm2" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 7.0 Mechanical, printed once for all SunSaver models (solid, multistrand and fine strand).
Where: PDF page 24, section 7.0, Mechanical, Power terminals wire size (max.)
[2]
ClearancesAT LEAST 2” (51 mm) above and below
Printed as "WARM AIR COOL AIR AT LEAST 2” (51 mm) AT LEAST 2” (51 mm)" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), Figure 3 (Mounting and cooling) of section 3.3, for all SunSaver models.
Where: PDF page 11, section 3.3 (Mounting), Step 2 and Figure 3
[2]
Dimensions15.2 × 5.5 × 3.2 cm
Printed as a single value shared across all nine versions.
Where: Wire Size / Weight / Dimensions block
[1]
Load output6 A
Printed as "Max. Load Current 6 A 10 A 20 A" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), the Specification Summary inside the front cover (columns SS-6/6L, SS-10/10L, SS-20L); 6 A is the column for the SS-6-12V. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Morningstar (morningstarcorp.com), which stays listed as an additional source.
Where: PDF page 2, Specification Summary, Max. Load Current row
[2] [1]
Controller typePWMPrinted describing the charging method.
Where: Battery Charging block
[1]
Charge current6 A
Printed as this model's own maximum solar current on its 12V system.
Where: Ratings table, Max. Solar Current row
[1]
Max PV current6.5 A
Maximum pv input current as printed in Morningstar SunSaver PV System Controllers Installation and Operation Manual (MS-001272 v4.1): "6.5", Ratings, Max. Solar Current row, SS-6/6L column.
Where: Ratings, Max. Solar Current row, SS-6/6L column
[2]
Max PV voltage30 V
Printed as "Max. solar input voltage 30 or 60V" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 7.0 Electrical; 30V is for 12 V and 60V for 24 V models, so 30V applies to the SS-6-12V. Re-cited on 1 October 2026 to the manufacturer's own document; previously cited to Morningstar (morningstarcorp.com), which stays listed as an additional source.
Where: PDF page 23, section 7.0, Electrical, Max. solar input voltage row
[2] [1]
Battery voltage12VPrinted as this model's own system voltage.
Where: Ratings table, System Voltage row
[1]
Battery wire size#10 AWG / 5 mm2 (max.)
Printed as "Power terminals wire size (max.) Solid #10 AWG / 5 mm2 Multistrand #10 AWG / 5 mm2 Fine strand #10 AWG / 5 mm2" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 7.0 Mechanical, printed once for all SunSaver models (solid, multistrand and fine strand). The wire charts on PDF pages 24 and 25 give sizes by current and one-way distance; the Fusing Chart limits fuses to 15 Amps on 14 AWG, 20 Amps on 12 AWG and 30 Amps on 10 AWG.
Where: PDF page 24, section 7.0, Mechanical, Power terminals wire size (max.)
[2]
Battery protectionin-line fuse holder no more than 6 inches (150 mm) from the battery positive terminal, or a circuit breaker
Printed as "Wire an in-line fuse holder no more than 6 inches (150" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 3.4, Step 2, a statement for all SunSaver models. Fuse size follows the Fusing Chart on PDF page 24 (maximum 15 Amps on 14 AWG, 20 Amps on 12 AWG and 30 Amps on 10 AWG copper wire).
Where: PDF page 13, section 3.4, Step 2 (Battery Wiring)
[2]
PV terminal torque10.6 in-lb
Printed as "Power terminals torque (max.) 10.6 in-lb / 1.2 Nm" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 7.0 Mechanical, printed once for all SunSaver models.
Where: PDF page 24, section 7.0, Mechanical, Power terminals torque (max.) row
[2]
Self consumption ma8 mA
Printed as a single maximum figure shared across all nine versions.
Where: Ratings table, Self-Consumption row
[1]
Supported chemistrySealed; Flooded/AGM
Printed as "Sealed 12 V or 24 V Flooded/AGM 12 V or 24 V" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), the section 7.0 Battery Set-points table (columns Sealed and Flooded/AGM). Section 3.1 (PDF page 8) says "The SunSaver charging algorithm is compatible with lead-acid or NiCd batteries. NiMH, Li-ion, and other battery chemistries are not compatible with the SunSaver charging algorithm."
Where: PDF page 23, section 7.0, Battery Set-points table
[2]
Mounting orientationvertical surface
Printed as "Locate the SunSaver on a vertical surface protected from direct sun, high temperatures, and water." in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 3.3, Step 1, for all SunSaver models. The same step says mounting on a horizontal surface does not provide optimal airflow and could lead to overheating.
Where: PDF page 11, section 3.3 (Mounting), Step 1
[2]
Battery terminal torque10.6 in-lb
Printed as "Power terminals torque (max.) 10.6 in-lb / 1.2 Nm" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 7.0 Mechanical, printed once for all SunSaver models.
Where: PDF page 24, section 7.0, Mechanical, Power terminals torque (max.) row
[2]
Battery voltage range6 -15V
Printed as "Battery voltage range 6 -15V or 6-30V" in Morningstar's SunSaver Installation and Operation Manual (MS-001272 v4.1), section 7.0 Electrical; the first figure is for 12 V and the second for 24 V models, so 6 -15V applies to the 12 V SS-6-12V.
Where: PDF page 23, section 7.0, Electrical, Battery voltage range row
[2]
Operating temperature−40°C to +60°C
Printed as a single value shared across all nine versions.
Where: Environmental block, Ambient Temperature row
[1]

Owner reviews

No owner reviews yet
Write a review

Sellers

No listed sellers in this data.

Price history

No seller price history.

Quick reference sheet

Controller type
PWM
Maximum PV voltage (Voc)
30 V
Rated charge current
6 A
Battery voltages
12V
Maximum PV input power
Not stated
Peak efficiency
Not stated

Evidence score

This category has no Evidence score.

Certificates

What this shows: what each record says and how far it reaches. It does not mean the product is approved.
UL 1741manufacturer claimpresent at observation[1]
Scope
equipment listing
Covered models
sunsaver-ss-6-12v
Limitations
Printed in the manufacturer's own datasheet Certifications block, captured September 28, 2026; no certificate number or issuer file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]
CSA C22.2 No. 213-M1987manufacturer claimpresent at observation[1]
Scope
equipment listing
Covered models
sunsaver-ss-6-12v
Limitations
Printed in the manufacturer's own datasheet Certifications block, captured September 28, 2026; no certificate number or issuer file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]
IEC/EN 62109-1manufacturer claimpresent at observation[1]
Scope
unresolved document set
Covered models
sunsaver-ss-6-12v
Limitations
Printed in the manufacturer's own datasheet Certifications block, captured September 28, 2026; no certificate number or issuer file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]
FCC Title 47 Part 15 Subpart Bmanufacturer claimpresent at observation[1]
Scope
unresolved document set
Covered models
sunsaver-ss-6-12v
Limitations
Printed in the manufacturer's own datasheet Certifications block, captured September 28, 2026; no certificate number or issuer file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]
UL1604/ANSI/ISA 12.12.01-2000manufacturer claimpresent at observation[1]
Scope
unresolved document set
Covered models
sunsaver-ss-6-12v
Limitations
Printed in the manufacturer's own datasheet Certifications block, captured September 28, 2026; no certificate number or issuer file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]

Warranty

FieldValueConditionsSource
Warranty term5 years
Printed as a single warranty statement shared across all nine versions.
Where: Final page, WARRANTY line
[1]

Recalls / legal notices

No recalls on file. All notices · Report a notice

This register is incomplete. A missing notice does not establish that a product has no recalls.

Documents

Archive and older revisions

Archive and older revisions0

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

Archived documents

Morningstar's own SunSaver (PWM) datasheet, control #MS-002634 REV 6/2026.EN, from morningstarcorp.com's own SunSaver product page.

Archived copy of a document published by Morningstar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 0.76 MB

Archived copy, unaltered, kept as a record of what Morningstar published. Original address: https://www.morningstarcorp.com/wp-content/uploads/IV-2-Morningstar-SunSaver-2026-Jun-25.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
2

Embedded dates are file metadata, not independent proof of publication.

SHA-256: faccf02ddc4b17991ff29bc933fe693a2c934e8196663d08cceb66c2f75173a2

Morningstar SunSaver PV System Controllers Installation and Operation Manual (MS-001272 v4.1)

Archived copy of a document published by Morningstar. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupMS-001272 v4.1 · 9.30 MB

Archived copy, unaltered, kept as a record of what Morningstar published. Original address: https://www.morningstarcorp.com/wp-content/uploads/operation-manual-sunsaver-en.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
26

Embedded dates are file metadata, not independent proof of publication.

SHA-256: 7d62d00d3e8ba46b4599234733cbe8e86dc8747bd07f20fea27aab5e29d6196f

Submit a document

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
SS-6-12V

Manufacturer SKU SS-6-12V

No historical observations recorded yet.

Other recorded fields

FieldValueConditionsSource
Evidence breakdownUnknown

Community discussions

No discussions linked yet. Search DIY Solar Forum

Sources

  1. Morningstar's own SunSaver (PWM) datasheet, control #MS-002634 REV 6/2026.EN, from morningstarcorp.com's own SunSaver product page. (Morningstar · manufacturer · observed Sep 27, 2026)
  2. Morningstar SunSaver PV System Controllers Installation and Operation Manual (MS-001272 v4.1) (Morningstar · manufacturer · MS-001272 v4.1 · observed Oct 1, 2026)

Sign in to report an error on this page

Similar products

All with a price