Charged ReviewsSaved 0Compare 0Login
EPEVER IT10420NC G3 MPPT Charge Controller with Load Control
EPEVER
Charge controller

EPEVER IT10420NC G3 MPPT Charge Controller with Load Control

Key specs

Charge current100 A
WeightIP43: 7.87kg; IP32: 7.63kg
Max PV voltage200V (at lowest temperature); 180V (at 25°C) V
Max conversion efficiency98.5 %
Load output100 A

All specifications

Identity

BrandEPEVER · Website
ModelIT10420NC G3
MarketUnknown
Manufacturer SKUUnknown
About brandEPEVER (formerly EPsolar) designs and manufactures MPPT and PWM solar charge controllers, inverters, batteries and monitoring accessories for off-grid and hybrid solar power systems.
SKU detail
conditions: No separate part number or SKU beyond the model name is printed in EPEVER's own manual or product page for this model.
Sources: No source on record
FieldValueConditionsSource
WeightIP43: 7.87kg; IP32: 7.63kg
Printed under the IT10420NC G3 column of the manual's own Mechanical Parameters table, as two rows for the IP43 and IP32 configurations, captured September 28, 2026.
Where: Section 5, Mechanical Parameters, Weight rows
[1]
DimensionsW 263 × H 158 × L 352 mm / W 10.4 × H 6.22 × L 13.9 in converted
Printed under the IT10420NC G3 column of the manual's own Mechanical Parameters table, as two rows for the IP43 (with terminal cover) and IP32 (controller only) configurations, captured September 28, 2026. The Mechanical Parameters table prints two rows labeled "Dimension(L×W×H)": IP43 (Controller & White Terminal Cover) "352mm × 263mm × 158mm" and IP32 (Controller Only) "352mm × 212mm × 149mm". The IP43 row, printed first, is the value; the IP32 row is kept as an alternative. Revised on 13 October 2026: stored as text before; converted to numbers using the axis order the document prints (length x width x height).
Where: Section 5, Mechanical Parameters, Dimension rows
Sources
W 212 × H 149 × L 352 mm

Printed in the "Dimension(L×W×H)" row for IP32 (Controller Only) as "352mm × 212mm × 149mm", the controller without its terminal cover.

[1]
[1]
Load output100 A
Printed under the IT10420NC G3 column of the manual's own Technical Specifications table as "Rated Load Current 100A", captured September 28, 2026.
Where: Section 5, Technical Specifications, Rated Load Current row
[1]
CommunicationsRS485 5VDC/200mA (RJ45)
Printed as "Communication Method RS485 5VDC/200mA (RJ45)", captured September 28, 2026.
Where: Section 5, Technical Specifications, Communication Method row
[1]
MPPT voltage(Battery voltage plus 2V, and > 28V) to 144V (@25°C)
Mppt voltage range as printed in EPEVER IT-NC G3 Series (50~100A) MPPT Charge Controller with Load Control User Manual, Version EN V1.3: "(Battery voltage plus 2V, and > 28V) to 144V (@25°C)", Technical specifications, MPPT Voltage Range row.
Where: Technical specifications, MPPT Voltage Range row
[1]
Controller typeMPPT
The manual's own cover prints "USER MANUAL Solar Charge Controller" (without the word MPPT) for the IT-NC G3 Series; the controller_type is confirmed by the manual's own body text, which describes "a brand new generation of MPPT control algorithm", captured September 28, 2026.
Where: Manual H1 / cover
[1]
Charge current100 A
Printed under the IT10420NC G3 column of the manual's own Technical Specifications table, captured September 28, 2026.
Where: Section 5, Technical Specifications, Rated Charging/Discharging Current row
[1]
Enclosure ratingIP43 (Controller & White Terminal Cover); IP32 (Controller Only)
Printed as "Ingress Protection IP43 (Controller & White Terminal Cover); IP32 (Controller Only)", captured September 28, 2026.
Where: Section 5, Environmental Parameters, Ingress Protection row
[1]
Max PV voltage200V (at lowest temperature); 180V (at 25°C) V
Printed under the IT10420NC G3 column of the manual's own Technical Specifications table, captured September 28, 2026.
Where: Section 5, Technical Specifications, PV Maximum Open-circuit Voltage row
[1]
Battery voltage12/24/48VDC or Auto
Printed as "Battery Rated Voltage 12/24/48VDC or Auto", captured September 28, 2026.
Where: Section 5, Technical Specifications, Battery Rated Voltage row
[1]
Max PV input power1,300W/12V; 2,600W/24V; 5,200W/48V
Printed under the IT10420NC G3 column of the manual's own Technical Specifications table, captured September 28, 2026.
Where: Section 5, Technical Specifications, Rated Charging Power row
[1]
Operating temperature-25°C to +60°C (>40°C derating)
Printed as "Operating Temperature -25℃ to +60℃ (> 40℃ derating)", captured September 28, 2026.
Where: Environmental Parameters, Operating Temperature row
[1]
Full load efficiency97.6 %
Printed under the IT10420NC G3 column of the manual's own Technical Specifications table, captured September 28, 2026.
Where: Section 5, Technical Specifications, Full Load Efficiency row
[1]
MPPT tracking efficiency99.5 %
Printed as "Tracking Efficiency ≥ 99.5%", captured September 28, 2026.
Where: Section 5, Technical Specifications, Tracking Efficiency row
[1]
Max conversion efficiency98.5 %
Printed under the IT10420NC G3 column of the manual's own Technical Specifications table, captured September 28, 2026.
Where: Section 5, Technical Specifications, Maximum Conversion Efficiency row
[1]

Owner reviews

No owner reviews yet
Write a review

Sellers

No listed sellers in this data.

Price history

No seller price history.

Quick reference sheet

Controller type
MPPT
Maximum PV voltage (Voc)
200V (at lowest temperature); 180V (at 25°C)
Rated charge current
100 A
Battery voltages
12/24/48VDC or Auto
Maximum PV input power
1,300W/12V; 2,600W/24V; 5,200W/48V
Peak efficiency
Not stated

Evidence score

This category has no Evidence score.

Certificates

What this shows: what each record says and how far it reaches. It does not mean the product is approved.
EN61000-6-1/EN61000-6-3manufacturer claimpresent at observation[1]
Scope
unresolved document set
Covered models
IT10420NC G3
Limitations
EPEVER's own user manual prints "EMC EN61000-6-1/EN61000-6-3" in its Certification row of the Technical Specifications table, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]
EN/IEC62109-1manufacturer claimpresent at observation[1]
Scope
unresolved document set
Covered models
IT10420NC G3
Limitations
EPEVER's own user manual prints "Certification Safety EN/IEC62109-1" in its Certification row of the Technical Specifications table, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]
FCC 47 CFR Part 15, Subpart Bmanufacturer claimpresent at observation[1]
Scope
unresolved document set
Covered models
IT10420NC G3
Limitations
EPEVER's own user manual prints "FCC 47 CFR Part 15, Subpart B" in its Certification row of the Technical Specifications table, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]
IEC62321-3-1manufacturer claimpresent at observation[1]
Scope
unresolved document set
Covered models
IT10420NC G3
Limitations
EPEVER's own user manual prints "ROHS IEC62321-3-1" in its Certification row of the Technical Specifications table, captured September 28, 2026. Recorded as printed: no certificate number or issuing body file number is given, so it is a manufacturer claim and not issuer-verified.
Record detail
Issued: Not stated
Valid from: Not stated
Expiry: Not stated
Not checked
Source
[1]

Warranty

Unknown: no warranty facts recorded.

Recalls / legal notices

No recalls on file. All notices · Report a notice

This register is incomplete. A missing notice does not establish that a product has no recalls.

Documents

  • Manuals

  • EPEVER IT-NC G3 Series (50~100A) MPPT Charge Controller with Load Control User Manual, Version EN V1.3Official · EPEVER · Official instruction manual · PDF
    Source details
    Revision
    Not stated
    Revision date
    Not stated

    Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-28.

    Location: Section 5, Technical Specifications table (per-model columns)

    Retrieved Sep 28, 2026

    EPEVER's own installation and user manual for the IT-NC G3 Series MPPT solar charge controllers, downloaded from the IT-NC G3 product page on epever.com, captured September 28, 2026.

    Archived copies

    Archived copy of a document published by EPEVER. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

    Archived backupRevision not recorded · 4.16 MB

    Archived copy, unaltered, kept as a record of what EPEVER published. Original address: https://www.epever.com/wp-content/uploads/2025/03/IT-NC-G3-BLE-Manual-EN-V1.3.pdf. Copyright and takedown

    Source first found
    This copy captured
    Archived
    File detailsOriginal source
    Embedded creation date
    Embedded modification date
    Pages
    84

    Embedded dates are file metadata, not independent proof of publication.

    SHA-256: e571c0928ae9e02fb7adf7a6d9c319abe557a136d18622f318a9014fc45297fe

    Open

Archive and older revisions

Archive and older revisions0

Earlier revisions, archived captures and copies published by someone other than the manufacturer. Every one stays reachable.

Archived documents

EPEVER IT-NC G3 Series (50~100A) MPPT Charge Controller with Load Control User Manual, Version EN V1.3

Archived copy of a document published by EPEVER. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].

Archived backupRevision not recorded · 4.16 MB

Archived copy, unaltered, kept as a record of what EPEVER published. Original address: https://www.epever.com/wp-content/uploads/2025/03/IT-NC-G3-BLE-Manual-EN-V1.3.pdf. Copyright and takedown

Source first found
This copy captured
Archived
File detailsOriginal source
Embedded creation date
Embedded modification date
Pages
84

Embedded dates are file metadata, not independent proof of publication.

SHA-256: e571c0928ae9e02fb7adf7a6d9c319abe557a136d18622f318a9014fc45297fe

Submit a document

Parts and accessories

No sourced accessories or replacement parts listed yet.

Model history

Model identity

Model
IT10420NC G3

Manufacturer SKU unknown

No historical observations recorded yet.

Other recorded fields

FieldValueConditionsSource
Evidence breakdownUnknown

Community discussions

No discussions linked yet. Search DIY Solar Forum

Sources

  1. EPEVER IT-NC G3 Series (50~100A) MPPT Charge Controller with Load Control User Manual, Version EN V1.3 (EPEVER · manufacturer · observed Sep 28, 2026)

Sign in to report an error on this page

Similar products

All with a price