Charged Reviews

Quick reference

AIMS Power SCC30AFM 30A 12/24V Flush Mount PWM Solar Charge Controller

Model: SCC30AFM · SKU: SCC30AFM

Prepared Nov 12, 2026

Common specifications

Controller type
PWMSource [1]
Maximum PV voltage
55 VSource [1]
Maximum PV input power
450 W (12 V); 900 W (24 V)Needs confirmationSource See note below[1, 2]
Maximum PV input power by battery voltageNot documented
PV input current / MPPTNot documented
Charge current
30 ASource [1]
Battery voltage
12 V / 24 VSource [1]
Battery chemistry
Flooded, AGM, gel; lithium (user defined)Source [1]
EfficiencyNot documented
MPPT tracking efficiencyNot documented
Maximum conversion efficiencyNot documented
Full-load efficiencyNot documented
Charger efficiencyNot documented
Weighted efficiencyNot documented
Rated charge powerNot documented
Load output currentNot documented
Self-consumption
8 mA (12 V); 12 mA (24 V)Source [1]
Enclosure
IP32Source [1, 2]
Safety listingNot documented
Enclosure volume1.03 L** Calculated from recorded external dimensions
Warranty termNot documented

All recorded specifications

Battery chemistry
Flooded, AGM, gel; lithium (user defined)Documented claim
Conditions

Printed as 3-phase charging for flooded, AGM and gel batteries, with user defined parameters for lithium batteries.

Location: PDF page 1, Controller Features

Printed as 3-phase charging for flooded, AGM and gel batteries, with user defined parameters for lithium batteries.

Location: PDF page 1, Controller Features

[1]
Battery voltage
12 V / 24 VDocumented claim
Conditions

Printed as 12V/24V.

Location: PDF page 2, Controller Specifications

Printed as 12V/24V.

Location: PDF page 2, Controller Specifications

[1]
Charge current
30 ADocumented claim
Conditions

Printed as a rated charge current of 30A.

Location: PDF page 2, Controller Specifications

Printed as a rated charge current of 30A.

Location: PDF page 2, Controller Specifications

[1]
Controller type
PWMDocumented claim
Conditions

Printed as a PWM 12/24V 30A charge controller.

Location: PDF page 1, introduction

Printed as a PWM 12/24V 30A charge controller.

Location: PDF page 1, introduction

[1]
Dimensions
169.4 D × 130 D × 46.7 D mm6.67 D × 5.12 D × 1.84 D in convertedNeeds confirmation6.67 x 5.12 x 1.84 in x 25.4 mm/in, rounded to 0.1 mmThe SCC30AFM manual prints 6.67 x 5.12 x 1.84 in (shown); the store page prints 3.5 x 5.125 x 0.75 in (L x W x H).
Conditions

Printed as a controller size of 6.67 x 5.12 x 1.84 in without naming the axes; converted to millimeters. A different value is printed elsewhere and kept as an alternative; the primary document value is shown.

Location: PDF page 2, Controller Specifications

Printed as a controller size of 6.67 x 5.12 x 1.84 in without naming the axes; converted to millimeters. A different value is printed elsewhere and kept as an alternative; the primary document value is shown.

Location: PDF page 2, Controller Specifications

[1, 2]
Enclosure
IP32Documented claim
Conditions

Printed as IP32. The store page prints the same value.

Location: PDF page 2, Controller Specifications

Printed as IP32. The store page prints the same value.

Location: PDF page 2, Controller Specifications

[1, 2]
Maximum PV input power
450 W (12 V); 900 W (24 V)Needs confirmationThe SCC30AFM manual prints 450 W (12 V); 900 W (24 V) (shown); the store page prints 360 W (12 V); 720 W (24 V).
Conditions

Printed as 450W at 12V and 900W at 24V. A different value is printed elsewhere and kept as an alternative; the primary document value is shown.

Location: PDF page 2, Controller Specifications

Printed as 450W at 12V and 900W at 24V. A different value is printed elsewhere and kept as an alternative; the primary document value is shown.

Location: PDF page 2, Controller Specifications

[1, 2]
Maximum PV voltage
55 VDocumented claim
Conditions

Printed as less than 55 Voc (an upper bound, said so).

Location: PDF page 2, Controller Specifications

Printed as less than 55 Voc (an upper bound, said so).

Location: PDF page 2, Controller Specifications

[1]
Operating temperature
-35 to 45 °C-31 to 113 °F convertedDocumented claim
Conditions

Printed as -35 to 45 °C (-31 to 113 °F) on the store page; the manual's operation temperature row is not cleanly legible in its text layer.

Location: Store page Specifications tab, temperature range

Printed as -35 to 45 °C (-31 to 113 °F) on the store page; the manual's operation temperature row is not cleanly legible in its text layer.

Location: Store page Specifications tab, temperature range

[2]
PV conductors (manual)
10 AWG PV wireDocumented claim
Conditions

Printed as use 10 AWG PV wire.

Location: PDF page 1, Recommended Wiring Sequence

Printed as use 10 AWG PV wire.

Location: PDF page 1, Recommended Wiring Sequence

[1]
Self-consumption
8 mA (12 V); 12 mA (24 V)Documented claim
Conditions

Printed as a no-load loss of 8 mA at 12 V and 12 mA at 24 V.

Location: PDF page 2, Controller Specifications

Printed as a no-load loss of 8 mA at 12 V and 12 mA at 24 V.

Location: PDF page 2, Controller Specifications

[1]
Weight
0.45 kg0.99 lb convertedNeeds confirmation1 lb x 0.45359237 kg/lb, rounded to 0.01 kgThe SCC30AFM manual prints 1 lb (shown); the store page prints 0.5 lb.
Conditions

Printed as a net weight of 1 lb; converted to kilograms. A different value is printed elsewhere and kept as an alternative; the primary document value is shown.

Location: PDF page 2, Controller Specifications

Printed as a net weight of 1 lb; converted to kilograms. A different value is printed elsewhere and kept as an alternative; the primary document value is shown.

Location: PDF page 2, Controller Specifications

[1, 2]

Warranty

Certificate records

No records documented.

Sources and revisions

  1. SCC30AFM Flush Mount Solar Charge Controller Manual (090821) (November 2, 2026 capture)Official instruction manual · Revision 090821 · Checked https://www.aimscorp.net/wp-content/uploads/2020/11/SCC30AFM-090821.pdf
  2. AIMS Power product page for the SCC30AFM (November 2, 2026 capture)Official product page · Checked https://www.aimscorp.net/product/flush-mount-30-amp-charge-controller-pwm-1224v/