locator: WattCycle product data (products.json, page 1), listing "WattCycle Best 12V RV Lithium Batteries – Drop-In Replacements for Group 24 / 27 / 31" (handle wattcycle-deep-cycle-rv-battery-ad), option "12V 100Ah Group 31", "sku":"WT12V100AH110PRO"
conditions: WattCycle's own product data, captured 2026-10-27, prints SKU "WT12V100AH110PRO" for option "12V 100Ah Group 31" (variant 50777659703592) of listing "WattCycle Best 12V RV Lithium Batteries – Drop-In Replacements for Group 24 / 27 / 31".
WattCycle prints "RVs M arine Solar Home Storage Golf Cart Trolling M otor Off-Grid W ide Application Solar Energy System Industrial Storage System Home Storage & Power W all Off-Grid System Trolling M otor Boat Electronics Recreational Vehicle" (User manual (12V series), page 14, Application Examples (manual lists "12V 100Ah Pro")). The labels are the maker's own words: Golf cart from "Golf Cart"; Home from "Home Storage"; Marine from "Boat"; Off-grid from "Off-Grid"; RV and van from "RVs", "Recreational Vehicle".
Printed as "26lbs±3%/11.79kg±3%" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), 12V100Ah Pro column, Weight row (pairing checked on the rendered page). Printed with a tolerance of plus or minus 3%.
Where: PDF page 7, BMS Warning and Protection table, 12V100Ah Pro, Weight
Printed as "6000@DOD80%" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), Battery Parameters table, Cycle Life row, which applies to every model listed including the 12V100Ah Pro.
Where: PDF page 11, Battery Parameters table, Cycle Life
The only capacity WattCycle prints beside this ordering code, and it is printed as part of a variant name rather than in a specification table. No depth of discharge, discharge rate or test temperature is stated, and WattCycle publishes no dimensions, weight, cycle life or temperature range for the code at all.
Where: RV landing page variant "12V 100Ah Group 31"; refurbished listing variant "12V 100Ah Group 31 - 110A BMS"
WattCycle names the BMS current in the variant name of its refurbished listing, which is the only place the figure appears beside this ordering code; the site navigation prints the same 110 A for the Group 31 Pro, and the "110" in the code itself matches. Whether it is a continuous charge limit, a continuous discharge limit or both is not stated, and the BMS maker is not named.
W 172 × H 218 × L 332 mm / W 6.77 × H 8.58 × L 13.1 in converted
Printed as "332 x 172 x 218(mm)" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), 12V100Ah Pro column, Dimensions row (pairing checked on the rendered page).
Where: PDF page 7, BMS Warning and Protection table, 12V100Ah Pro, Dimensions
Read from rendered page 11 of WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed): the Terminal Bolt Size row shows "M8(M6 for 12V50Ah)"; M8 applies to this model.
Where: PDF page 11, Battery Parameters table, Terminal Bolt Size
Printed as "Ingress Protection Rating IP65" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), Battery Parameters table.
Where: PDF page 11, Battery Parameters table, Ingress Protection Rating
Printed as "4 Series(Max) 4 Parallel(Max)" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), Battery Parameters table, Series & Parallel Connections row.
Where: PDF page 11, Battery Parameters table, Series & Parallel Connections
Printed as "12V 100Ah Pro 20A/110A 110A 300A±50A 130A±20A" in the WattCycle 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed) (page 7, Product Specifications / 04). Row "12V 100Ah Pro" of the specification table, whose columns are Standard/Maximum Continuous Charge, Max Continuous Discharge Current, Over-Current Discharge Protection and Over-Current Charge Protection. 110A is the maximum continuous charge current (second half of 20A/110A).
Printed as "Rated Voltage 12.8V" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), Battery Parameters table, which lists the 12V100Ah Pro among the models it covers.
Where: PDF page 10, Battery Parameters table, Rated Voltage
Read from rendered page 7 of WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed): the BMS Warning and Protection table's Standard/Maximum Continuous Charge row shows "20A/110A" in the 12V100Ah Pro column (the text layer of this table is out of row order). The first figure is the standard charge current.
Where: PDF page 7, BMS Warning and Protection table
Battery x 1, User Manual x 1, Screw x 4, Plastic Insulation Cap x 2
Printed as "Battery x 1 User Manual x 1 Screw x 4 Plastic Insulation Cap x 2" in the WattCycle 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed) (page 20, Warranty and Returns, Packing List). The manual covers the WattCycle 12V series and lists "12V 100Ah Pro" among its models; this statement covers every model of the manual.
Where: PDF page 20, Warranty and Returns, Packing List
Printed as "4 Series(Max) 4 Parallel(Max)" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), Battery Parameters table, Series & Parallel Connections row.
Where: PDF page 11, Battery Parameters table, Series & Parallel Connections
Read from rendered page 7 of WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed): the BMS Warning and Protection table's Standard/Maximum Continuous Charge row shows "20A/110A" in the 12V100Ah Pro column (the text layer of this table is out of row order). The second figure is the maximum continuous charge current.
Where: PDF page 7, BMS Warning and Protection table
Printed as "12V 100Ah Pro 20A/110A 110A 300A±50A 130A±20A" in the WattCycle 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed) (page 7, Product Specifications / 04). Row "12V 100Ah Pro" of the specification table, whose columns are Standard/Maximum Continuous Charge, Max Continuous Discharge Current, Over-Current Discharge Protection and Over-Current Charge Protection. 110A in the second column is the maximum continuous discharge current.
Printed as "You can mount our battery in any position." in the WattCycle 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed) (page 18, FAQs). The manual covers the WattCycle 12V series and lists "12V 100Ah Pro" among its models; this statement covers every model of the manual.
Printed as "32°F~140°F/0℃~60℃" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), Battery Parameters table, Storage Temperature row.
Where: PDF page 11, Battery Parameters table, Storage Temperature
Read from rendered page 7 of WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed): the BMS Warning and Protection table's Max Continuous Discharge Current row shows "110A" in the 12V100Ah Pro column (the text layer of this table is out of row order).
Where: PDF page 7, BMS Warning and Protection table
Printed as "Recommended Charging Voltage: 14.6V ±0.2V" in WattCycle's 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed), Charging section, which applies to the whole 12V series. Printed with a tolerance of plus or minus 0.2V.
Lowest first. Each price is the date we last read it; it may have changed. Stock isn't shown.
Store
Price
Read
Details
Source
WattCycle
$189.99
Nov 15, 2026
Single new unit from WattCycle's own manufacturer store, matched on the exact variant SKU. Multi-packs, charger kits, cell-only listings and bundle variants are separate listings and are excluded. Tax and shipping are extra. · Store SKU WT12V100AH110PROPrice readings (23)
12.45 L* (Calculated enclosure volume: W × H × D in mm ÷ 1,000,000)W: 172 × H: 218 × L: 332 mm / W: 6.77 × H: 8.58 × L: 13.1 in11.79 kg / 25.99 lb
Evidence score
5/100Missing details20% documented
The Evidence score uses the priorities you choose. It counts published documents, such as certificates and warranty terms, and it compares a documented figure with the best documented figure of the same kind. It does not count owner reviews, and it is not a verdict on product quality or on how many people have reviewed it. A low score can mean little is documented, or that a documented figure is below the best of its kind. Undisclosed data scores 0.
Missing details. This number counts only the evidence recorded so far. The source review for this product is not finished, or the maker has not disclosed enough, so the number can only go up.
Missing for this product: Certificates evidence needed; Warranty energy disclosure evidence needed; Lifetime / capacity evidence needed; Cell model disclosure evidence needed.
12 V · Format not recorded · Rated capacity
The warranty term and the lifetime energy are each scored against the best documented value for a home storage battery: a value earns its share of that best, times the weight. A documented value always earns points; an undisclosed one earns 0.
WattCycle’s Warranty Policy page, captured September 22, 2026, prints "LiFePO4 Batteries All new battery models 5 years 2 years (7 years total)": every new LiFePO4 battery model carries a five-year base term from the original consumer’s purchase date, proved by an order screenshot or invoice. The two further years are conditional and are recorded separately. The policy names no individual model, so the term is read from the category row.
Lifetime / capacity6000@DOD80% · not confirmed0 / 20
No qualifying figure · 20% weight
Not published. No lifetime-production bonus.
A value is on file but is not counted: it carries a warning or is not confirmed.
Research pending, 0 points: Certificates, Warranty energy disclosure, Cell model disclosure.
Computed from public specifications and evidence records. Warranty duration is not service quality; certificate evidence points are not a safety rating. Compatibility and installation limits still apply.
What this shows: what each record says and how far it reaches. It does not mean the product is approved.
Unknown: no certification evidence recorded in this data.
Warranty
Field
Value
Conditions
Source
Remedy
Free replacement or refund for a quality defect confirmed within six months of purchase, free replacement for one confirmed after six months and inside the term; WattCycle pays shipping both ways in either case, after an RMA number is issued
Where: Warranty Policy page, section II "Warranty Claim Process and Fees", fee-responsibility table and refund policy
Excludes accident, abuse and force majeure; failure to follow the manual; voltage or current mismatch, reverse polarity, wrong fuses or undersized cables; series or parallel connections beyond the permitted limits; mixing with other battery brands; unauthorised disassembly, modification or repair and altered serial numbers; cosmetic wear and natural capacity fade; use beyond the rated cycle life; and damage from more than one year without maintenance charging
Summarised from the seven-part exclusion list on WattCycle’s Warranty Policy page captured September 22, 2026. The policy also states that opening a battery at WattCycle support’s direction does not void the warranty, that the warranty applies only to purchases through official WattCycle channels and authorised distributors, and that valid proof of purchase is required. The page carries no effective or revision date and WattCycle reserves the right to revise it.
Where: Warranty Policy page, section III "Warranty Exclusions (Limitations of Liability)"
To better protect your rights and interests, please log in to the WattCycle website or scan the QR code to register for the warranty promptly
Printed as "please log in to the WattCycle website or scan the QR code"; "scan the QR code to register for the warranty promptly" in the WattCycle 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed) (page 1, Cover). The manual covers the WattCycle 12V series and lists "12V 100Ah Pro" among its models; this statement covers every model of the manual.
WattCycle’s Warranty Policy page, captured September 22, 2026, prints "LiFePO4 Batteries All new battery models 5 years 2 years (7 years total)": every new LiFePO4 battery model carries a five-year base term from the original consumer’s purchase date, proved by an order screenshot or invoice. The two further years are conditional and are recorded separately. The policy names no individual model, so the term is read from the category row.
7 years total, only if the buyer registers the product on wattcycle.com within three months of purchase
The policy prints "LiFePO4 Batteries All new battery models 5 years 2 years (7 years total)" and the note "Extended warranty must be activated through product registration on the official WattCycle website within 3 months of purchase.". The extension is therefore not automatic; a buyer who does not register inside three months keeps the five-year term. Repaired or replaced units do not extend the original period.
Where: Warranty Policy page, section I.1 "Warranty Period" and its note
Location: PDF page 1, cover model list; PDF pages 6 to 11, product specifications
Retrieved Oct 1, 2026
WattCycle's own manual for its 12V LiFePO4 battery series, captured 1 October 2026 from cdn.shopify.com via WattCycle's downloads page; no revision is printed in the document (the file name says V1.9, 2026.03.02); its cover and specification tables name twenty 12V models including the 12V 100Ah Pro and 12V 100Ah TM Smart. Manufacturer instructions, not independent tests.
Archived copies
Archived copy of a document published by WattCycle. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-22.
Location: Sections "I. Warranty Commitment" (warranty-period table and registration note), "II. Warranty Claim Process and Fees" (claim steps, fee-responsibility table, refund policy) and "III. Warranty Exclusions (Limitations of Liability)"
Retrieved Sep 21, 2026
WattCycle’s Warranty Policy page, linked from the footer of every page on www.wattcycle.com and captured byte for byte on September 22, 2026. It establishes the terms WattCycle published on the access date: a warranty-period table that gives all new LiFePO4 battery models a five-year base term plus two further years (seven total) on registration within three months of purchase, gives like-new units one year, gives battery cells no warranty at all, and puts chargers, inverters, controllers and wiring cables together in an "Accessories" row with a one-year term; the claim process and its 24-48 hour response promise; a fee table under which WattCycle pays shipping for a confirmed quality defect and the buyer pays it for a change of mind; a refund window of six months; and an exclusion list. It names no individual model, carries no effective or revision date, and reserves WattCycle’s "right of final interpretation", so it fixes no claim outcome and cannot be read as a warranty contract for any one product.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-22.
Location: Variant list "12V 100Ah Group 31 – $199.99"; the page carries no Tech Specs table
Retrieved Sep 21, 2026
WattCycle’s own multi-model RV landing page, captured byte for byte on September 22, 2026. It is a buying guide with a variant picker, not a specification page: it carries no specification table at all. It is read here for one thing only, identity -- it is the page on which WattCycle sells the ordering code WT12V100AH110PRO, under the variant name "12V 100Ah Group 31", at the same $199.99 as its Group 24 and Mini siblings. That matters because WattCycle’s dedicated Group 31 Pro product page sells what appears to be the same battery under a different ordering code, WT12V100AH100PRO. The page establishes neither which code is authoritative nor whether the two codes describe one battery or two.
Captured by scripts/prepare-brand-sweep-sep21.mjs on 2026-09-22.
Location: Variant list "12V 100Ah Group 31 - 110A BMS"; ordering codes in the variant data
Retrieved Sep 21, 2026
WattCycle’s refurbished-stock page, captured byte for byte on September 22, 2026. It sells returned units of six different models under one listing and carries no specification table. It is read here only because it is the one page on www.wattcycle.com that states, in words, what the ordering code WT12V100AH110PRO is: its variant is named "12V 100Ah Group 31 - 110A BMS" and its code is WT12V100AH110PRO-RE. It establishes the naming, not the battery’s figures, and nothing on it describes a new unit: every variant is a like-new return carrying WattCycle’s one-year refurbished term rather than the five-year new-battery term.
Manufacturer product page captured on the access date. It establishes what WattCycle published for this exact stock keeping unit then: the parameter tables it prints and the manuals it links. It is not a test report and it does not establish stock, price or certification.
WattCycle 12V Series LiFePO4 Deep Cycle Battery manual (no revision printed)
Archived copy of a document published by WattCycle. Copyright retained by the publisher; kept for reference and verification only, no endorsement implied. To ask for its removal, email [email protected].
No sourced accessories or replacement parts listed yet.
Model history
Model identity
Model
WT12V100AH110PRO
Manufacturer SKU WT12V100AH110PRO
No historical observations recorded yet.
Other recorded fields
Field
Value
Conditions
Source
Evidence breakdown
method version: 0.21-personal
documented pct: 20
basis: nominal
missing:
Certificates evidence needed
Warranty energy disclosure evidence needed
Lifetime / capacity evidence needed
Cell model disclosure evidence needed
criteria:
key: certificateEvidence
label: Certificates
value: 0
unit: evidence points
shown: Research pending
shown detail: Unknown
state: pending
points: 0
ceiling: 45
weight: 45
share: 0
covered: no
missing: yes
folded: yes
reason: Unknown
reason text: Unknown
note: No qualifying applicable evidence recorded. This is not proof that certification is absent. Applies: UL 1973; CEC not applicable to 12 V / 24 V / 36 V DC modules; UL 9540 not applicable to 12 V / 24 V / 36 V DC modules.