Charged Reviews · Quick reference
Sol-Ark L3 HV-60
- Brand
- Sol-Ark
- Model
- L3 HV-60
- SKU / part number
- ?
- Category
- Batteries
chargedreviews.com/batteries/sol-ark-l3-hv-60
Energy and chemistry
Charge and discharge
- Continuous charge current
- ?
- Continuous discharge current
- ?
- Maximum charge current
- ?
- Maximum discharge current
- ?
- Peak charge current
- ?
- Peak discharge current
- ?
- Continuous output power
- ?
- Peak output
- ?
- Maximum charge voltage
- ?
- Charge cutoff voltage
- ?
- Discharge cutoff voltage
- ?
BMS and communication
Operating temperature
Mechanical and mounting
Installation (from the manual)
Torque
- Main terminal torque
- ?
- Communication terminal torque
- ?
- Ground terminal torque
- 4.5 N·m [2]
Conductors
- Cable size
- 4 AWG PushLok BCU to inverter cables (positive and negative), included [2]
Clearances and orientation
- Installation clearances
- At least 60 cm [23.6 in] between the battery sides and any walls or other barriers; at least 10 cm [4 in] between adjoining battery racks; 60 cm [23.6 in] at the rear; 60 cm [23.6 in] in front of the battery racks; minimum ceiling height 244 cm [96 in] measured from the floor [2]
- Mounting orientation
- ?
Grounding
- Grounding
- Connect the BCU grounding wire to the top crossbeam of the rack, and a grounding wire from the marked holes in the bottom crossbeam to the site's grounding system [2]
Communication
- Communication ports
- BCOM: inter-battery communication port for the first battery module; HVBOUT: communication output port to next L3 HV BCU; HVBIN: communication input port for previous L3 HV BCU; PCS: RJ45 port for BCU to inverter closed-loop communication; USB: USB2.0 port for data logging or firmware updates [2]
- Address / DIP setting
- ?
Not in the manual: Protection
System limits
- Maximum parallel units
- ?
- Series connection
- ?
- Maximum system energy
- 983 kWh [2]